ME2-CO- Ф fourteen × 5 Carbon monoxide sensor Introduction: ME2-CO- Ф fourteen × 5 Carbon monoxide sensor is a fuel cell type sensor. Carbon monoxide and oxygen produce corresponding Redox on the working electrode and the opposite electrode and release charges to form a current. The current generated is proportional to the carbon monoxide concentration and follows Faraday's law. The carbon monoxide concentration can be determined by measuring the current. Mainly used for carbon monoxide concentration detection in commercial, small generator on-site, vehicle mounted and other fields Features: 1. Low power consumption, high accuracy, and high sensitivity 2. Wide linear range and strong anti-interference ability 3. Excellent repeatability and stability Technical parameters: Detection gas: Carbon monoxide (CO) Range: 0-1000ppm Maximum measurement limit: 2000ppm Sensitivity: ＞ 0.8nA/ppm Resolution: 1ppm Response time (T90): ＜ 30S Load resistance (recommended): (500/1K/2K) Ω Repeatability:<3% of output value Output linearity: linear Zero drift (-20 ℃~40 ℃): ≤ 10ppm Temperature range: -20 ℃~80 ℃ Humidity range: 15% -90% RH Pressure range: standard atmospheric pressure ± 10% Service life: 10 years
Introduction: ME2-CO- Ф fourteen × 5 Carbon monoxide sensor is a fuel cell type sensor. Carbon monoxide and oxygen produce corresponding Redox on the working electrode and the opposite electrode and release charges to form a current. The current generated is proportional to the carbon monoxide concentration and follows Faraday's law. The carbon monoxide concentration can be determined by measuring the current. Mainly used for carbon monoxide concentration detection in commercial, small generator on-site, vehicle mounted and other fields
