ME-480 automatic nucleic acid extractor Introduction: ME-480 Automatic Nucleic Acid Extractor is a fully automatic sample preparation equipment based on magnetic bar method for nucleic acid extraction. It has the characteristics of high throughput, high precision, high cost performance, and high openness. The system is equipped with 96-channel ultra-high flux magnetic rod head, temperature control module and magnetic rod cover automatic loading and unloading module, compatible with different types of magnetic bead method nucleic acid extraction reagents, and is used for large-scale automatic nucleic acid extraction and purification of various types of samples. Features: 1. 96 ultra-high flux magnetic rods: Using 96×5 ultra-high flux magnetic rod head, it can complete the nucleic acid extraction of 96/192/288/384/480 samples at one time, and the maximum throughput of nucleic acid extraction at one time is 480 samples. 2. Automatic loading and unloading of the magnetic rod cover: Equipped with an automatic loading and unloading module for the magnetic rod cover, which saves the trouble of time-consuming and laborious manual operation and has a higher degree of automation. 3. Anti-cross contamination: Anti-residual dripping baffle design; equipped with H14 high-efficiency filtration system HEPA, 0.3µM particle filtration efficiency ≥99.99%; UV ultraviolet disinfection system, ultraviolet lamp irradiation intensity 100µW/cm2. 4. Super strong magnetic attraction: The magnetic flux of the magnetic rod is as high as 5200 Gauss, and the recovery rate of the magnetic beads: ≥98%, which reduces the risk of magnetic loss of the magnetic beads. 5. Temperature control module: 10 sets of temperature control modules, the temperature control range is from room temperature to 105 °C, while meeting the temperature requirements of the lysis and elution steps. Technical parameter: (Dimensions (length X width X height): 1130cm X 770cm X 1160cm Weight: about 175Kg Power supply voltage and power: AC220V, 50Hz, 900VA Single channel volume: 96 Number of single-channel boards: 6 Number of heating plates: 10 Maximum temperature: 105°C Processing volume: 20-1000μL Sample space difference: CV <=3% Diagnosis mix: 5 levels adjustable Eliminate aerosols: UV, negative pressure filter system
Introduction: ME-480 Automatic Nucleic Acid Extractor is a fully automatic sample preparation equipment based on magnetic bar method for nucleic acid extraction. It has the characteristics of high throughput, high precision, high cost performance, and high openness. The system is equipped with 96-channel ultra-high flux magnetic rod head, temperature control module and magnetic rod cover automatic loading and unloading module, compatible with different types of magnetic bead method nucleic acid extraction reagents, and is used for large-scale automatic nucleic acid extraction and purification of various types of samples.
