Introduction
MD-S910 pressure controller is a high-precision intelligent controller integrating pressure measurement, display and control. Its main application is automatic control operation of various water treatment systems, electromechanical equipment automation, engineering machinery and medical equipment.
The MD-S910 pressure controller realizes the unmanned operation of the equipment in the true sense, and the setting is simple. The main functions are: Realizing low voltage automatic starting, high voltage automatic stopping; Setting delay start to prevent frequent opening of equipment; Automatic stop, prevent dry pumping; overpressure automatically alarms and stops equipment operation; password protection can be entered to prevent non-professionals from modifying the set parameters. Features
The upper and lower limit pressure control points can be freely set and adjusted to meet different control requirements.
4-digit LED real-time digital display pressure value, easy for users to observe.
Three pressure units are available for switching.
Built-in relay signal output, anti-backlash setting to avoid frequent movement of the controlled device.
The service life is longer than that of a conventional mechanical switch, and long-term use will not fail.
Control accuracy is higher than traditional mechanical switches, no noise.
Shockproof, strong anti-interference, fast response and stable performance. Technical Parameters
Pressure range: 0-16 kg, 0-10 kg, 0-6 kg (0-1.6MPa 0-1MPa 0-0.6MPa)
Overload capability: 150%
Output form: Relay output, normally open normally closed
Output relay capacity: 220V AC 5A
Power supply: 220V AC; 24V DC; 380V AC
Setting range: The control point can be set for the full range segment and the anti-fluctuation hysteresis setting can be set.
Accuracy: 1% FS
Measuring medium: gas, water, oil
Operating temperature: -20 ~ 65 ° C
Interface size: G1/2 (four-way water pipe thread)
M20*1.5 (pressure gauge interface)
G1/4 (two-pipe thread)
Certification: CE certification
Introduction
MD-S910 pressure controller is a high-precision intelligent controller integrating pressure measurement, display and control. Its main application is automatic control operation of various water treatment systems, electromechanical equipment automation, engineering machinery and medical equipment.
The MD-S910 pressure controller realizes the unmanned operation of the equipment in the true sense, and the setting is simple. The main functions are: Realizing low voltage automatic starting, high voltage automatic stopping; Setting delay start to prevent frequent opening of equipment; Automatic stop, prevent dry pumping; overpressure automatically alarms and stops equipment operation; password protection can be entered to prevent non-professionals from modifying the set parameters.
