MD-S560R digital remote pressure gauge Introduction
The MD-S560 digital remote pressure gauge can be used with 4-20mA current output or RS485 signal output.
The digital remote pressure gauge adopts four-digit display, which can be used for real-time pressure on the spot. At the same time, the pressure signal can be transmitted far and the transmission distance is better than 500 meters. Built-in pressure sensor, powerful, user can replace pressure unit, calibration zero error, correction filter constant and so on.
The MD-S560 digital remote pressure gauge is made of 304 stainless steel housing and connector, waterproof cable outlet, waterproof grade IP65, and has a wide range of media suitability.
This product can be used to replace traditional pointer type remote pressure gauges or pressure transmitters. Features
With RS485 signal output
4-20mA signal output (light has module)
Adopt standard MODBUS RTU communication protocol
Durable and durable with a full 304 stainless steel housing
Isolated current, isolated output, strong anti-interference
High precision, long transmission distance and stable performance
Small size, diameter 60mm
Baud rate 2400/4800/9600/19200/38400/57600 optional
Display digits are optional
Pressure unit optional
High degree of intelligence, users can set their own address, baud rate, filter constant, re-check, etc. Technical Parameters
Pressure range
Vacuum range: (0~-100) kPa
Compound range: (-0.1~0.1)MPa (-0.1~0.25)MPa (-0.1~0.4)MPa (-0.1~0.6)MPa (-0.1~1.0)MPa (-0.1~2.5)MPa
(-5~5) kPa (-10~10) kPa (-25~25) kPa (-50~50) kPa
Micro pressure range: (0~5) kPa (0~10) kPa (0~25) kPa (0~50) kPa (0~100) kPa
Conventional range: (0~160) kPa (0~250) kPa (0~400) kPa (0~600) kPa (0~1) MPa (0~1.6) MPa ... (0~100) MPa
Installation interface: M20*1.5 G1/4 NPT1/4
Accuracy level: 0.5 level 0.25 level
Display digits: 4-digit LCD display
Size: diameter 60mm thickness 38mm
Power supply: 12-32V (24VDC recommended)
Power consumption: <0.4W
Measuring medium: water, oil, gas, non-corrosive medium for stainless steel
Transmission distance: better than 500 meters
Waterproof rating: IP65
Use environment:
Use temperature: -20~80 °C;
Storage temperature: (-40 ~ 125) °C
Introduction
The MD-S560 digital remote pressure gauge can be used with 4-20mA current output or RS485 signal output.
The digital remote pressure gauge adopts four-digit display, which can be used for real-time pressure on the spot. At the same time, the pressure signal can be transmitted far and the transmission distance is better than 500 meters. Built-in pressure sensor, powerful, user can replace pressure unit, calibration zero error, correction filter constant and so on.
The MD-S560 digital remote pressure gauge is made of 304 stainless steel housing and connector, waterproof cable outlet, waterproof grade IP65, and has a wide range of media suitability.
This product can be used to replace traditional pointer type remote pressure gauges or pressure transmitters.
