Introduction: MCR100 automatic micro-carbon residue measuring instrument is an automatic measuring instrument for petroleum products designed and manufactured according to the requirements of GB/T 17144, ISO10370 and ASTM D4530. The range of residual carbon measured is from 0.10% (m/m) to 30.0% (m/m). For petroleum products with a residual carbon value exceeding 0.10% (m/m), the measurement results of this analyzer are equivalent to those of the Kang's residual carbon method (GB/T 268). Features: The combustion chamber of the MCR100 automatic micro-carbon residue measuring instrument is directly in front of the measuring instrument, and the waste liquid collecting bottle is directly installed under the combustion chamber, so as to prevent some products from passing through the curved pipe to the waste liquid collecting bottle, and the long-term waste liquid It accumulates in the bend of the pipe, and avoids the disadvantage that some products are very inconvenient to install the waste collection bottle at the bottom of the instrument. The air circuit is compact in design, neatly laid out, and easy to install and maintain. The heating bath is integrated with the top cover for easy assembly and maintenance. Technical Parameters: Combustion chamber size: φ85mm x 105mm (diameter X height); Combustion chamber operating temperature range: room temperature to 500 ° C; Constant temperature accuracy of the combustion chamber: 500±2°C; Set the time error <0.11S; Pressure adjustment range: 0kPa (0kg/cm2) to 392 kPa (4kg/cm2); Flow adjustment range: 100ml ~ 1000ml / min; 150mlmin and 600ml / min automatic conversion; Waste liquid collection bottle size: 200ml, threaded interface glass bottle; Exhaust pipe diameter: φ12; Heater power: 1000W; Air consumption: standard nitrogen at a pressure of 14700 kPa (150 kg/cm2), 100 times/bottle; Dimensions: 380 × 410 × 570 (mm) Weight: 15kg
Introduction: MCR100 automatic micro-carbon residue measuring instrument is an automatic measuring instrument for petroleum products designed and manufactured according to the requirements of GB/T 17144, ISO10370 and ASTM D4530. The range of residual carbon measured is from 0.10% (m/m) to 30.0% (m/m). For petroleum products with a residual carbon value exceeding 0.10% (m/m), the measurement results of this analyzer are equivalent to those of the Kang's residual carbon method (GB/T 268).
