Introduction The MA-8B rapid moisture analyzer uses a combination of halogen lamp and SRA structure radiant heat to achieve high-speed uniform heating and shorten test time. The halogen lamp can be replaced and the SRA filter can be easily cleaned. Provides the most advanced lamp monitoring and isolation window design to prevent the lamp from being splashed when the measured object is heated. Features: 1. Using the SHS load cell with fast and sensitive characteristics, so that very few samples can be accurately measured under high-precision weighing. During the test, the dry state can be directly confirmed and the end time can be estimated. 2. The MA-8B fast moisture analyzer has the function of automatic peeling. Even if the measurement is performed continuously, it can be accurately measured by zero drift correction. 3. The design of the lamp tube monitoring and isolation window prevents the lamp tube from being splashed when the measured object is heated. 4. The halogen lamp and the uniquely designed SRA (Secondary Radiation Auxiliary Device) radiator are used to shorten the measurement time and form a fast and uniform heater. 5. Measurement result storage function 6. It can record and output calibration data and measurement data to meet quality management and certification requirements. 7. Built-in R232C output interface, optional and connect to printer and computer. 8. Ultra-large high-resolution backlit LCD display 9. The components are easy to operate. The ergonomically designed tray handle of MA-8B rapid moisture analyzer can avoid accidents such as burns when hot samples are put in or taken out. The wing-shaped handle makes the heating cover easy to open and close. 10. Guarantee of low maintenance cost, users do not need to stop when replacing the halogen lamp, and the small room with protection is easy to clean technical parameter: Specification: 50g/0.01g Weighing pan size: Φ90mm Reading accuracy: 0.01g Heating source: halogen tube Temperature sensor: PT-100 Test temperature range: 60℃—200℃ Test temperature accuracy: 1℃ Test moisture range: 0.00%—100.00% Test moisture accuracy: 0.02% Repeatability: 0.005 Resolution: 0.02% Weight: 4.5kg Dimensions: 360x215x170mm
Introduction The MA-8B rapid moisture analyzer uses a combination of halogen lamp and SRA structure radiant heat to achieve high-speed uniform heating and shorten test time. The halogen lamp can be replaced and the SRA filter can be easily cleaned. Provides the most advanced lamp monitoring and isolation window design to prevent the lamp from being splashed when the measured object is heated.
