Introduction: The MA-30 intelligent Karl Fischer moisture analyzer uses a large LCD LCD display with a touch screen and an intelligent operating system. The man-machine dialogue is flexible and convenient, and it can be easily used by basic computer operations. In addition to the characteristics of high detection sensitivity, simple operation, fast test speed, and good repeatability, it also has the function of water absorption measurement according to international standard documents; test results storage and printing functions; sample measurement process is automatically controlled by the instrument, stirring , The measurement is automatically completed in about 60 seconds, and the measurement result is displayed directly; fully sealed titration cell bottle to avoid contact between reagents and humans, and avoid the influence of environmental humidity; the instrument should have a Chinese LCD display, and have automatic calculation and printing functions, and can print out Percentage content, sample number, tester, experiment date, etc. Features: Adjustable moisture measurement speed Automatic inhalation of reagents Automatic waste discharge Automatic reminder of reagent failure Technical Parameters： Display mode: LCD touch screen display Measuring range: 0.00001% (0.1ppm) to 100% Repeatability: 0.0002 Resolution: 0.1ppm Linear correlation coefficient of moisture titration: ≥0.9999 Power consumption: less than 50W Power supply: AC 220V±10%, 50Hz Working environment temperature: 5℃-40℃ Working environment humidity: 85%
Introduction: The MA-30 intelligent Karl Fischer moisture analyzer uses a large LCD LCD display with a touch screen and an intelligent operating system. The man-machine dialogue is flexible and convenient, and it can be easily used by basic computer operations. In addition to the characteristics of high detection sensitivity, simple operation, fast test speed, and good repeatability, it also has the function of water absorption measurement according to international standard documents; test results storage and printing functions; sample measurement process is automatically controlled by the instrument, stirring , The measurement is automatically completed in about 60 seconds, and the measurement result is displayed directly; fully sealed titration cell bottle to avoid contact between reagents and humans, and avoid the influence of environmental humidity; the instrument should have a Chinese LCD display, and have automatic calculation and printing functions, and can print out Percentage content, sample number, tester, experiment date, etc.
