M-200A Friction and Wear Testing Machine Introduction: The M-200A friction and wear testing machine is suitable for sliding friction and wear performance testing of plastic products, rubber products, graphite sheets, or other composite materials. It can also measure the friction force, friction coefficient, and wear amount of the test samples during the test. This instrument integrates the latest intelligent circuit system for control, and is upgraded and transformed by combining the functions of the old M-200 friction and wear testing machine. This instrument has the advantages of high measurement and control accuracy and convenient operation, and is a testing equipment for research institutes, quality inspection institutions, and laboratories. characteristic: After the experiment is completed, you can freely set and obtain the experimental data within a certain period of time 2. Curve display: time temperature, time friction coefficient, temperature friction coefficient, speed temperature, etc 3. The collection frequency can be set, and the test data can be obtained according to the set collection frequency and exported to EXCEL 4. The experimental data and curves can be exported in electronic format to combine them for easy archiving and printing 5. The instrument transmission mechanism has been upgraded from a stepper electrode to an AC servo motor, with precise and adjustable speed, more stable and reliable, high torque, and low noise 7. Equipped with a closed weight loading device and friction test for greater safety and reliability, with a transparent window for observing the friction state 8. The speed can be adjusted and the test speed can be freely set 9. Printing report parameters are optional, and you can choose the experimental parameters to be printed according to your needs 10. 10N. The combination of M-range sensors and precision servo motors can meet the requirements of high load testing 11. The appearance adopts artificial curve design, which is beautiful, concise and generous in appearance 12. New real-time temperature acquisition function has been added, which can meet the test data requirements at different friction temperatures 13. Equipped with an oil tank, it can be tested in the oil Technical parameters: Sample size: 30mm × 7mm × 6mm Rotation speed: 0-200 revolutions per minute (adjustable) Load: 196N ± 0.1% (can be increased to 392N) Friction ring size: ¢ 40 × 10mm, chamfer 0.5 × 45 °, concentricity deviation between outer and inner surfaces less than 0.01 Friction ring material: 45 steel, quenched, heat treated HRC40-45, outer surface smoothness ▼ 8 Friction torque: 0-10N • m Weight of weights: One 4KG weight and four 1KG weights, which can achieve weight stacking function. Speed accuracy: 1% Load accuracy: 0.5% Friction torque accuracy: 1% Counter accuracy: 1S Sensor measurement accuracy: 1% FS
Introduction: The M-200A friction and wear testing machine is suitable for sliding friction and wear performance testing of plastic products, rubber products, graphite sheets, or other composite materials. It can also measure the friction force, friction coefficient, and wear amount of the test samples during the test. This instrument integrates the latest intelligent circuit system for control, and is upgraded and transformed by combining the functions of the old M-200 friction and wear testing machine. This instrument has the advantages of high measurement and control accuracy and convenient operation, and is a testing equipment for research institutes, quality inspection institutions, and laboratories.