Introduction: This tester can be used to test the wear resistance of various metal materials and non-metal materials (nylon, plastic, etc.) under various conditions such as sliding friction, rolling friction, rolling-slip compound friction and intermittent contact friction, etc. The friction mechanism and the friction coefficient of the material were measured. And can simulate various materials in dry friction, wet friction, abrasive wear under different conditions such as friction wear test. The results of this product are in line with GB/T12444.2-90 metal wear test method - MM wear test; GB/T3960-83 plastic sliding friction test method. Technical Parameters: Maximum test force: 2000N Load measurement range: 0 to 300 Newtons; 300 to 2000 Newtons The sample shaft speed: 360,180r/min The following sample shaft speed: 400,200r/min Load scale division value: 0—300 Newtons—-10 Newtons/div 300 - 2000 Newtons - 50 Newtons / Grid Friction torque measurement range: 0～15 Newton•meter The maximum axial displacement of the upper specimen: ±4 mm Two-speed motor: (1) Three-phase, 380V, 50Hz. (2) Speed: 2870; 1440 rpm (3) Power: 1.1KW; 0.75KW Test machine dimensions: 970×660×1100mm Weight: about 500 kg
