LX-DF series split infrared thermometer Introduction: The working principle of the LX-DF infrared thermometer is to calculate the surface temperature of the object based on the infrared radiation intensity of the object. The biggest feature of the LX-DF infrared thermometer is that it can measure the temperature of an object without touching it. Therefore, it is convenient to measure the target temperature that is difficult to access or move. The LX-DF infrared thermometer consists of two parts: a miniature measuring probe and a display setting electronics box. The small size of the probe can be easily installed and used. The electronic box is powerful and can display the target temperature directly on the spot. It can be set in the field to ensure the application of different industrial sites and improve the validity and authenticity of the measurement results. The LX-DF infrared thermometer provides 4-20 mA current output and can be easily installed in a variety of applications, especially for industrial environments requiring long distance and strong interference. The LX-DF infrared thermometer has a variety of practical parameter setting functions that can be easily set by the user. The full range of LX-DF infrared thermometers offer a wide range of temperature ranges and different optical factors for users to choose from to meet different measurement requirements. Technical Parameters: Measuring wavelength: 8 – 14 μm Distance coefficient ratio: 15:1/2:1 Response time : 150 ms (95%) System accuracy: ±1% or ±2°C (maximum value) (ring temperature: 23±5°C) Repeatability: ±0.5% or ±1°C (maximum value) (ring temperature: 23±5°C) Temperature resolution: 0.2 ° C Temperature coefficient: ±0.05%/K or ±0.05 K/K Emissivity: 0.100~1.099 set by button Other settable parameters Average time Peak hold (including advanced peak hold) Valley hold (including advanced valley hold) Current output range setting (within the instrument's measurement temperature range) Restore product factory settings Basic performance Environmental rating: IP65 (NEMA-4) Ambient temperature : 0 – 80°C Storage temperature: -20 – 85°C Relative humidity: 10 – 95% (no condensation) Material: Stainless steel Probe size: φ14 mm x 30 mm Electronic box size: φ60 mm x 120 mm Weight: 510 g Vibration: IEC 68-2-6: Any axis 11-200 Hz.3G Impact: IEC 68-2-27: Arbitrary axis 11ms. Power supply: 10-24 VDC Pull current: up to 100mA Analog output: 4 - 20 mA Output impedance: Maximum loop impedance 500? (24VDC)
Introduction: The working principle of the LX-DF infrared thermometer is to calculate the surface temperature of the object based on the infrared radiation intensity of the object. The biggest feature of the LX-DF infrared thermometer is that it can measure the temperature of an object without touching it. Therefore, it is convenient to measure the target temperature that is difficult to access or move. The LX-DF infrared thermometer consists of two parts: a miniature measuring probe and a display setting electronics box. The small size of the probe can be easily installed and used. The electronic box is powerful and can display the target temperature directly on the spot. It can be set in the field to ensure the application of different industrial sites and improve the validity and authenticity of the measurement results. The LX-DF infrared thermometer provides 4-20 mA current output and can be easily installed in a variety of applications, especially for industrial environments requiring long distance and strong interference. The LX-DF infrared thermometer has a variety of practical parameter setting functions that can be easily set by the user. The full range of LX-DF infrared thermometers offer a wide range of temperature ranges and different optical factors for users to choose from to meet different measurement requirements.
