Introduction: The leather folding tester is used for the flex resistance test of upper and thin leathers (upper leather, handbag leather, bag leather, etc.) and cloth. Test principle: The folding resistance of leather refers to the bending of one end surface of the test piece as the inner side and the other end surface as the outer side. In particular, both ends of the test piece are respectively mounted on a designed test fixture. The fixture is fixed, and the other fixture is reciprocated to bend the test piece. When there is damage on the test piece, record the number of times it is bent, or after a certain number of times, see the degree of damage. Standards compliant: BS-3144, JIB-K6545, QB1873, QB2288, QB2703, GB16799-2008, QB / T2706-2005 and other leathers are required to be manufactured in accordance with the requirements of the Flexibility Inspection Method of Leather. Technical Parameters: Model: LX-7124 Bending angle: 22.5 (± 0.5) ° Test piece value: 6PCS Bending rate: 100 (± 5) C.P.M Counter: 6 digits Motor: 400W Input power: AC220V 50HZ Machine size: about 450 × 500 × 350 (mm) Machine weight: about 35kg
The leather folding tester is used for the flex resistance test of upper and thin leathers (upper leather, handbag leather, bag leather, etc.) and cloth. Test principle: The folding resistance of leather refers to the bending of one end surface of the test piece as the inner side and the other end surface as the outer side. In particular, both ends of the test piece are respectively mounted on a designed test fixture. The fixture is fixed, and the other fixture is reciprocated to bend the test piece. When there is damage on the test piece, record the number of times it is bent, or after a certain number of times, see the degree of damage. Standards compliant: BS-3144, JIB-K6545, QB1873, QB2288, QB2703, GB16799-2008, QB / T2706-2005 and other leathers are required to be manufactured in accordance with the requirements of the Flexibility Inspection Method of Leather.
