Introduction: The instrument is designed by absorbing the advantages of similar instruments at home and abroad. Its appearance is beautiful and easy to operate. The microcomputer system uses two counting methods, intuitive and generous, easy to set up, and it can test at eight stations simultaneously to improve the test efficiency. The instrument is also equipped with two kinds of Lissajous 24mm × 24mm, 60.5mm × 60.5mm trajectories and a variety of supporting accessories, which can adapt to a variety of test method standards. This instrument is suitable for: GB / T4802.2, ASTM D4970, ISO12945-2 and other fabric fluffing test. The principle: a circular sample and a fabric of the same material are rubbed with a Lissajous graphic motion trajectory under a given pressure, and after the specified number of revolutions is reached, the sample is evaluated for pilling. Also suitable for GB / T13775, ASTM D4966, ISO12947 and other fabric wear resistance test. Its principle: Under a certain pressure, the circular fabric sample rubs against the standard abrasive according to the movement trajectory of the Lissajous curve, resulting in sample damage. The wear resistance of the sample is used to indicate the wear resistance of the fabric. performance. Comply with standards: Conform to: GB / T4802.2, ASTM D4970, ISO12945-2 and other fabrics fluffing test. Also meet: GB / T13775, ASTM D4966, ISO12947 and other fabrics abrasion resistance test. Technical Parameters: Specifications: Number of work stations 4-digit count display a. Expected count: 0 ～ 999999 times b. Cumulative count: 0 ～ 999999 times Stroke: 24 ± 0.5mm, 60.5 ± 0.5mm Pressurized mass: a. Holder: 200g b. Clothing sample weight: 395g c. Furniture decoration sample weight: 594g d. Stainless steel butterfly: 260g Grinding block effective friction diameter: A type 200g (1.96N) friction head ￠ 28.8-0.084mm Type B 155g (1.52N) friction head ￠ 90 －0.10mm Relative speed of gripper and grinding table: 50-2r / min Mass of pressure hammer: 2385 ± 10g Consumables: 4 sheets of wool felt, 4 sheets of test cotton Weight: 100kg Power: Ac220V 50Hz
The instrument is designed by absorbing the advantages of similar instruments at home and abroad. Its appearance is beautiful and easy to operate. The microcomputer system uses two counting methods, intuitive and generous, easy to set up, and it can test at eight stations simultaneously to improve the test efficiency. The instrument is also equipped with two kinds of Lissajous 24mm × 24mm, 60.5mm × 60.5mm trajectories and a variety of supporting accessories, which can adapt to a variety of test method standards. This instrument is suitable for: GB / T4802.2, ASTM D4970, ISO12945-2 and other fabric fluffing test. The principle: a circular sample and a fabric of the same material are rubbed with a Lissajous graphic motion trajectory under a given pressure, and after the specified number of revolutions is reached, the sample is evaluated for pilling. Also suitable for GB / T13775, ASTM D4966, ISO12947 and other fabric wear resistance test. Its principle: Under a certain pressure, the circular fabric sample rubs against the standard abrasive according to the movement trajectory of the Lissajous curve, resulting in sample damage. The wear resistance of the sample is used to indicate the wear resistance of the fabric. performance. Comply with standards: Conform to: GB / T4802.2, ASTM D4970, ISO12945-2 and other fabrics fluffing test. Also meet: GB / T13775, ASTM D4966, ISO12947 and other fabrics abrasion resistance test.
