Introduction: LTMS-50K digital tension meter is a handheld device used to accurately measure the tension of various process materials (including yarns, fibers, wires, and optical fibers) in operation or at rest. Features: 1. It adopts the "three-wheel tension measurement principle". 2. High precision and high resolution. Digital display, no parallax. 3. N (Newton), kg (kg), lb (pound), g (gram) four measurement units are available for selection and mutual conversion. 4. Simultaneously display the current value, maximum value, peak value, and minimum value during the measurement interval. 5. It can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually. 6. Perform 62 measurements per second, and display the average value of the measurement according to the time interval selected by the user. 7. Use USB data cable to output and communicate with PC. 8. Provide Bluetooth data output options. Technical Parameters: Model: LTMS-50K Measuring range: 0~50.0kgf 0~490N 0~110Lbf Resolution: 0.01kgf 0.1N 0.1Lbf Accuracy: ±1.5% or better Unit: kgf, gf, N, Lbf Measuring principle: strain gauge Measurement frequency: 16 milliseconds (62.5 samples/sec) Sensor wheel offset (maximum) 0.2mm Overload capacity: 150% of full scale Temperature coefficient: Zero point: less than ±0.3%FS/°C within range: less than ±0.01%FS/°C Display update rate: 0.5, 1.0, 2.0 or 4.0 seconds display conversion optional Measurable values: current value, maximum value, peak value, minimum value Roller material: stainless steel (standard) Plastic (optional) Maximum speed: 2000m/min Operating conditions: Temperature: 0~40°C (32~104°F) Humidity: <80%RH
Introduction: LTMS-50K digital tension meter is a handheld device used to accurately measure the tension of various process materials (including yarns, fibers, wires, and optical fibers) in operation or at rest.
