Introduction: The microinjection pump LST01-1A is a single-channel perfusion pump that is mainly used in biological laboratories and has a one-piece structure. Capable of loading different sizes of syringes (injectors), the LST01-1A microinjector pump is suitable for high precision, low flow liquid transport. Features: 1.LST01-1A syringe inner diameter input function: you can select the syringe from the list or directly input the inner diameter of the syringe 2. The micro-injection pump has a friendly human-machine interface: large-screen liquid crystal display, digital knob used in conjunction with membrane buttons, easy to operate and fast 3. Power-down memory function: 1. EEPROM saves the setting parameters. After power-on, there is no need to reset. 2. Power off during operation in flow mode, resume running or stop according to the set parameters after power-on. 4. Traffic jam protection function: When the propulsion mechanism of the injection pump is blocked during the working process, the injection pump will stop the work of the propulsion mechanism and emit a whistle alarm. 5. The 485 communication bus can be connected to the host computer and controlled by the background software. 6. External control interface: with input / output control function 7. Liquid volume calibration function: more accurate flow can be obtained through the calibration procedure 8. Syringe protection function: can prevent syringe damage by adjusting the position of the limit block Technical Parameters: Micro syringe pump working mode: push-pull mode Number of execution units: 1 Maximum stroke: 140mm Stroke resolution: 0.156μm Line speed range: 5μm/min-65mm/min (flow rate = line speed × cross-sectional area inside the syringe) Line speed adjustment resolution: 5μm/min Stroke control accuracy: error ≤ ± 0.5% (stroke ≥ 30% of the maximum stroke) Rated linear thrust: >90N Syringe selection: built-in main manufacturer, main model syringe for selection Syringe customization: can be directly input into the syringe Flow Correction: Get a more accurate volume through the calibration procedure Operating parameter settings: dispense liquid volume, injection time, etc. Display parameter selection: volume, flow or line speed Power-down memory: After power-on, you can choose whether to continue working according to the state before power-off. Status signal output: 2-channel OC gate signal output for indicating start/stop and direction status Control signal input: 2 channel start/stop control input, 1 channel falling edge trigger signal control start and stop; 1 channel TTL level signal control start and stop Communication interface: RS485 Power requirements: AC 90V-260V/15W Working environment temperature: 0°C-40°C Working environment relative humidity: <80% Dimensions: 280 × 210 × 140 (mm) Weight: 3.6kg
Introduction: The microinjection pump LST01-1A is a single-channel perfusion pump that is mainly used in biological laboratories and has a one-piece structure. Capable of loading different sizes of syringes (injectors), the LST01-1A microinjector pump is suitable for high precision, low flow liquid transport.
