LPC-110 (0.1μm) laser dust particle counter Introduction
The LPC-110 (0.1 μm) laser dust particle counter is entirely made of SUS 304 stainless steel. The laser sensor uses an all-semiconductor laser and a photomultiplier tube to ensure the stability of the light source and the accuracy of the signal receiver. With 8" color touch screen display and control, the display data is clear and easy to operate. The imported electronic flow sensor is used to ensure the accuracy of the sampling flow. The instrument can automatically judge various purification levels according to the criteria selected by the customer. Used in high-grade electronics, optics, aerospace and military units for the detection of dust particles. Technical parameters
Model: LPC-110
Light source: semiconductor laser, life expectancy greater than 10 years >50000h
Sampling flow rate: 2.83L/min (0.1CFM) or 1L/min (0.353CFM)
Display mode: 8” color touch screen, Chinese and English interface selection, real-time display, previous cycle display, real-time density display, displayable time, date, measured value, room number, sampling point, sampling times, status, etc., 95% UCL Calculation, can directly display the particle concentration (particles / cubic meter)
Measurement method: Single measurement / calculation measurement / confidence measurement
Particle size channel: 0.1, 0.2, 0.3, 0.5, 1.0, 5.0μm six-speed particle size display simultaneously
Sampling period: 1-99 minutes and 99 seconds optional; delay time: 0-99S; interval time: 0-999s; continuous sampling times: 0-99 times
Self-cleaning time: ≤10 (min)
UCL settings: Report conforms to IS014644-1; FS 209E
Data storage: ≥ 20000 sets of single measurement / 10000 sets of UCL
Alarm function: alarm after the clean room 10, 100, 1000, 10000, 100000 level exceeds the standard
Printer: Built-in thermal printer (print paper can be stored for 10 years)
Power supply: Built-in 12.6V large capacity lithium battery, power adapter AC: 80-240V 50/60 Hz (use time is about 4h)
Dimensions: 215 × 360 × 175 mm3 (W × D × H, without interface, handle) about 6Kg
Standard configuration: Equal power sampling head / sampling tube (1.8m) / sampling bracket / zero counting filter / power line / printing paper / standard packing box
Data export: USB interface
Other functions: 1. You can choose to print the particle size channel as needed.
2. In the various report standard modes, the measured value, calculated value, UCL value and level judgment can be printed with one button.
Introduction
The LPC-110 (0.1 μm) laser dust particle counter is entirely made of SUS 304 stainless steel. The laser sensor uses an all-semiconductor laser and a photomultiplier tube to ensure the stability of the light source and the accuracy of the signal receiver. With 8" color touch screen display and control, the display data is clear and easy to operate. The imported electronic flow sensor is used to ensure the accuracy of the sampling flow. The instrument can automatically judge various purification levels according to the criteria selected by the customer. Used in high-grade electronics, optics, aerospace and military units for the detection of dust particles.
