LK2100A electrochemical workstation Introduction
The LK series electrochemical workstation is mainly used for research and basic teaching in multidisciplinary fields such as electrochemical mechanism, electrode process dynamics research, materials, corrosion, batteries, biology, medicine, environmental ecology, etc. Instrument, thousands of papers published by LK series instruments and indexed by SCI and other three retrieval systems.
The LK2100A electrochemical workstation has an AC impedance range of 10μHz ～ 1MHz, direct current measurement of 10 pA, and current measurement resolution of 5fA. It can be directly used in AC impedance testing, applied to electrochemical mechanism research, electroanalytical chemistry, basic research on organic electrosynthesis, electricity Basic chemistry teaching, steady-state current measurement on ultra-micro electrodes, research and development of battery materials, bioelectrochemistry (sensors), metallurgy, pharmaceuticals, environmental analysis and other fields
Feature
★ The instrument hardware is powerful, the detection range is wide, the potential increase is ≤0.01mv, the baseline current is ≤ ± 4PA, the output voltage is ± 50V, the maximum current is ± 2A, and the frequency response of a potential increase process can be achieved through adjustment.
★ Many methods and full functions, almost covering the known electrochemical methods.
★ Custom methods, developed according to actual scientific research needs.
Technical Parameters
Constant potential range: ± 12V
Scanning speed: 0.01mV / s ～ 5000V / s
Minimum potential increment: 10μV
Current resolution: 5fA
Sampling interval: 0.0001 ~ 60000s
Constant current range: ± 250mA
Maximum output voltage (slot pressure): ± 15V
Potentiometer bandwidth: 8MHz
AC impedance amplitude: 0.01 ~ 327mV
AC impedance frequency: 10μHz ~ 1MHz
The LK2100A electrochemical workstation has an AC impedance range of 10μHz ～ 1MHz, direct current measurement of 10 pA, and current measurement resolution of 5fA, which can be directly used for AC impedance test. The LK2100A electrochemical workstation is used in electrochemical mechanism research, electroanalytical chemistry, basic research in organic electrosynthesis, basic electrochemical teaching, steady-state current measurement on ultra-micro electrodes, battery material development, bioelectrochemistry (sensors), metallurgy, and pharmaceuticals Research and testing in environmental analysis and other fields.
