LIFS-976 series laser induced fluorescence spectrometer Introduction
LIFS-976 series laser induced fluorescence spectrometer mainly consists of three components: 976nm multimode fiber coupled laser, 976nm fiber probe and mini fiber spectrometer. Compared with the traditional fluorescence spectrometer, the 976nm laser-induced fluorescence spectrometer has the characteristics of good reproducibility, fast measurement speed and high sensitivity.
The system uses TEC refrigeration control to ensure that the laser light source works more stable and has better performance. The test sample can be solid, powder, molten sheet, liquid, etc. The detection system of LIFS-976 series laser induced fluorescence spectrometer has more reproducibility, fast measurement speed and high sensitivity. Suitable for all kinds of industrial and scientific research users. The main application fields can be divided into: biomedicine, gem identification, nano materials, agricultural production, petrochemical industry, etc. Features
1.Semiconductor 976nm laser, small size, low power consumption
2.High spatial resolution: the measurement result can reach micron level
3.Stability reaches 3% RMS
4. 10,000.00 hours life
5. Millisecond spectrum acquisition speed
6.20mW-500mW, adjustable laser power, higher utilization efficiency
7.Solid, liquid and powder can be tested
8.Confocal design, OD3 filtering effect Technical parameters
Dimensions: 180 × 135 × 72mm
Weight: 1.5Kg
Laser wavelength: 976nm +/- 1nm
Laser line width: <0.2nm
Output power: 20mW-500mW
Power stability: <3% P-P
Service life: 10000hrs
Warm-up time: 15 Min
Filter laser cut-off depth: OD5
Laser wavelength range: 976nm +/- 5nm
Fluorescence wavelength range: 350nm-850nm
Working distance: 7.5mm
Probe diameter: 9.5mm
Pigtail length: 150cm
Spectral range: 400-1100nm
Pixels: 2048
Resolution: 1.5nm
Signal to noise ratio: 300: 1
A / D: 16bit
Power supply voltage: 5V 3A
Working temperature: 10-35 ℃
Introduction
LIFS-976 series laser induced fluorescence spectrometer mainly consists of three components: 976nm multimode fiber coupled laser, 976nm fiber probe and mini fiber spectrometer. Compared with the traditional fluorescence spectrometer, the 976nm laser-induced fluorescence spectrometer has the characteristics of good reproducibility, fast measurement speed and high sensitivity.
The system uses TEC refrigeration control to ensure that the laser light source works more stable and has better performance. The test sample can be solid, powder, molten sheet, liquid, etc. The detection system of LIFS-976 series laser induced fluorescence spectrometer has more reproducibility, fast measurement speed and high sensitivity. Suitable for all kinds of industrial and scientific research users. The main application fields can be divided into: biomedicine, gem identification, nano materials, agricultural production, petrochemical industry, etc.
