LGT-100 Laser Gas Analyzer Introduction: LGT-100 is a flameproof in-situ probe type tunable laser gas analyzer used for industrial online analysis and environmental online monitoring. Can analyze gases such as O2, CO, NH3, CO2, CH4, H2O, HCl, HF, HCN, etc. under various complex working conditions online (note: a single analyzer can only analyze 1-2 components). The measured gas concentration ranges from constant to trace. Application: Analysis of converter gas recovery; CDQ circulating gas analysis; Oxygen analysis of coke oven gas after electric decoking; Analysis of coal and gas injection into blast furnaces; Analysis of ammonia released gas from cement industry; Trace CO detection and analysis in industries such as power, cement, and environmental protection; Trace HCl and HF analysis in environmental protection and chemical industry. Features: 1. Using on-site measurement without the need for a pre-treatment system to avoid sampling adsorption, blockage, and component damage during the pre-treatment process. 2. Integrated structure: No moving parts, with good reliability and stability. 3. Adopting "single line spectrum" technology, it is not subject to cross interference from background gases. 4. This optical path realizes decoupling direction adjustment, and on-site optical path adjustment is simple. Technical parameters: Linear error: ≤ 1% F. S Zero drift: ≤ 1% F. S. /Half a year Span drift: ≤ 1% F. S. /Half a year Ex logo: ExdIICT6 GB Protection level: IP66. Response time: ≤ 1s (T90). Analog input: 2x4-20mA input Analog output: 2x4-20mA output Digital communication: RS485/RS232 via serial port Working temperature: -20 ℃~60 ℃ Purge gas: (0.3~0.8) MPa nitrogen, purified instrument air
Introduction: LGT-100 is a flameproof in-situ probe type tunable laser gas analyzer used for industrial online analysis and environmental online monitoring. Can analyze gases such as O2, CO, NH3, CO2, CH4, H2O, HCl, HF, HCN, etc. under various complex working conditions online (note: a single analyzer can only analyze 1-2 components). The measured gas concentration ranges from constant to trace. Application: Analysis of converter gas recovery; CDQ circulating gas analysis; Oxygen analysis of coke oven gas after electric decoking; Analysis of coal and gas injection into blast furnaces; Analysis of ammonia released gas from cement industry; Trace CO detection and analysis in industries such as power, cement, and environmental protection; Trace HCl and HF analysis in environmental protection and chemical industry.
