1 Sales LFS800 smoke and dust concentration continuous monitor,Manufacturer
Position: Home > > Environmental monitoring and analysis > Gas on-line monitoring > Flue gas monitoring system > LFS800 smoke and dust concentration continuous monitor for Environmental monitoring

LFS800 smoke and dust concentration continuous monitor for Environmental monitoring

Product ID:HQZXyanqi036

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberLFS800
    Brand NameANRONGXIN
    Payment TermsT/T, paypal
    LFS800 smoke and dust concentration continuous monitor
     
    Introduction:
           This system is a set of highly sensitive continuous soot concentration monitoring instruments, which can continuously and continuously monitor the soot (particulate matter) concentration in wet flue gas under harsh environments such as wind, rain, lightning, dust, high and low temperatures.
    Features:
    1. Ultra low range, minimum range (0 ~ 5) mg/m³, ultra high sensitivity, minimum detection limit 0.01mg/m³. Support dual range function.
    2. The instrument uses a variety of advanced technologies. Including: related noise cancellation technology, laser emission power stabilization technology, very low noise TIA, interference control and signal integrity design, anti-harsh environment design technology, providing fast, reliable and accurate quantitative dust emission data.
    3. Unique patented automatic calibration technology to achieve automatic calibration of zero and full scale.
    4. Using jet technology to extract part of the flue gas from the flue, compact structure, simple installation, anti-lightning and harsh environment, low cost and low maintenance.
    5. Continuous heating and constant temperature in the flue gas transmission process to prevent measurement errors caused by wet flue gas condensation during the transmission process.
    6. Support manual zero point calibration and automatic zero point calibration at the same time.
    7. An external monitoring platform can be selected. The monitoring platform adopts intelligent technology and has a display function, which can display various test data and fault prompts in real time, which is convenient for on-site debugging and maintenance.
    8. Realize constant velocity sampling through the built-in flow velocity measuring device.
    9. Prompt for unique equipment running status, abnormal temperature and abnormal parameters.
    10. Power-off self-protection function, use backup battery to supply power after power off, close the valve, and protect internal structure
    Technical Parameters:
    Measuring range: minimum (0~5)mg/m³ maximum (0~200)mg/m³
    Zero drift: ±2%F.S./24h
    Range drift: ±2%F.S./24h
    Indication error: ±10%F.S.
    Detection limit: 0.01mg/m³
    Flue diameter: (2~20)m
    Flue flow velocity: (0~40)m/s
    Flue pressure: (-5~5)kPa
    Flue gas temperature: ≤300
    Flue gas humidity: ≤300g/m³
    Anti-blocking blowback: automatic, the blowback time interval can be set
    Power supply: 220V/AC, power 3kW
    Analog output: (4~20)mA
    Digital interface: RS485
    Shell: full metal shell
    Size: MP: (190×1700×190)mm(H×W×D) can be customized
                      IPU+FU: (1340×730×560)mm(H×W×D)
    Weight: MP: 14kg, IPU+FU: 102 kg
    Protection level: host IP55, electronic components IP65
     

     
  • Introduction:
           This system is a set of highly sensitive continuous soot concentration monitoring instruments, which can continuously and continuously monitor the soot (particulate matter) concentration in wet flue gas under harsh environments such as wind, rain, lightning, dust, high and low temperatures.

     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com