Introduction: The computerized carbon silicon analyzer is used to quickly determine the hot metal properties such as the carbon equivalent CE%, carbon content C%, silicon content Si%, spheroidization rate SG% of gray cast iron and ductile iron molten iron before the furnace; predict the tensile strength of ordinary gray cast iron Wait. Non-professionals can operate after simple training; complete the test within the waiting time for the molten iron, and then adjust the composition of the molten iron according to the automatically calculated amount of recarburizer, ferrosilicon, and scrap steel, which can effectively guide the production practice. Features: 1. Measurement function, determination of parameters such as carbon equivalent, carbon content, silicon content, spheroidization rate, tensile strength, and Brinell hardness; 2. Predict the tensile strength and Brinell hardness of gray cast iron; 3. Measure the tensile strength and hardness of molten gray cast iron after inoculation, and predict the inoculation effect; 4. After the composition determination is completed, the system automatically calculates the adjusted addition amount of alloy according to the target value of carbon and silicon content preset by the user; 5. The measurement results are automatically saved; 6. The historical cooling curve and historical measurement results can be reproduced at any time; 7. The measured data can be exported to EXCEL for data analysis, and the measured data can also be copied to the office computer for storage and analysis through the USB interface; 8. Automatic printing is optional, and it can be matched with any printer to quickly print curves and measurement data. Special feature 1. After the composition is determined, the user can modify the target value according to the carbon and silicon content required by the product and recalculate the adjusted addition amount of the alloy, so that the adjusted molten iron composition can better meet the product requirements. 2. Measure the tensile strength and hardness of molten gray cast iron after inoculation, and the result is more accurate. technical parameter: Analysis time: about 1 minute and 30 seconds Measuring range and measuring accuracy: Carbon equivalent CEL: 2.50～4.80%; ±0.08% Carbon content C %: 2.30～4.20%; ±0.05% Silicon content Si%: 0.60～3.80%; ±0.10% Spheroidization rate 60%～99%; ±5% Tensile strength 150～400MPa; ±10MPa Hardness 100～300HB; ±10HB
Introduction: The computerized carbon silicon analyzer is used to quickly determine the hot metal properties such as the carbon equivalent CE%, carbon content C%, silicon content Si%, spheroidization rate SG% of gray cast iron and ductile iron molten iron before the furnace; predict the tensile strength of ordinary gray cast iron Wait. Non-professionals can operate after simple training; complete the test within the waiting time for the molten iron, and then adjust the composition of the molten iron according to the automatically calculated amount of recarburizer, ferrosilicon, and scrap steel, which can effectively guide the production practice.
