Introduction:
Laser405-1HFU is a semiconductor laser module with a central wavelength of 405nm and a maximum power of 100mW, which is suitable for spectral measurement applications. The product is based on semiconductor laser technology and provides the stable spectral and stable power laser output required by the spectrum analysis instrument. The built-in TEC cooling module enables the laser module to have good spectral and power characteristics.
The laser has a built-in ARM digital control MCU that implements digital PID. The optimized optical coupling design and highly integrated circuit design allow the Laser405-1HFU to have USB software control capabilities with power control from 0-100mW. At the same time, the built-in MCU and optimized algorithms achieve highly accurate laser power output. The accuracy of the laser power setting is within 3%, and the built-in calibration procedure truly realizes what the customer sees and achieved. Technical Parameters:
Model Number: Laser405-1HFU
Size:
Weight: 170g
Laser wavelength: 405+/-3nm
Laser line width: <2nm
Laser power: 0~100mW (adjustable)
Power Stability: <3% P-P (2hrs)
Output method: Fit FC/PC fiber
Lifetime: 5, 000 hours
Noise: <1% RMS (10Hz～100MHz)
Supply voltage: DC5 V/2A
Fiber Connector: FC/PC
Optical fiber parameters: 105 μm, 0.22 NA, UV-VIS band
Working temperature: 0°C ~ 40°C
Storage temperature: -20°C to 60°C
Operating Humidity: 5% to 85%
Warm-up time: 15 min
Introduction:
Laser405-1HFU is a semiconductor laser module with a central wavelength of 405nm and a maximum power of 100mW, which is suitable for spectral measurement applications. The product is based on semiconductor laser technology and provides the stable spectral and stable power laser output required by the spectrum analysis instrument. The built-in TEC cooling module enables the laser module to have good spectral and power characteristics.
The laser has a built-in ARM digital control MCU that implements digital PID. The optimized optical coupling design and highly integrated circuit design allow the Laser405-1HFU to have USB software control capabilities with power control from 0-100mW. At the same time, the built-in MCU and optimized algorithms achieve highly accurate laser power output. The accuracy of the laser power setting is within 3%, and the built-in calibration procedure truly realizes what the customer sees and achieved.
