LABULK 0335 Intelligent Touch Screen Tap Density Tester
Introduction: LABULK 0335 tap density meter is an instrument used to measure the tap density of powder. The instrument consists of a touch screen operation panel, vibration components, motor, printer, electronic balance and measuring cylinder. The LABULK 0335 tap density meter, developed according to international and domestic standards, works according to the set speed and tap height. The measuring cylinder for the dry powder sample placed on the vibrating component vibrates up and down to measure the tap density of the powder. . The instrument can set the measurement parameters at will, and can automatically measure and print. In addition to the tap density, it can also automatically measure and calculate the powder fluidity and other indexes such as the Hausner Ratio and the degree of compression specified in the Chinese Pharmacopoeia 2020. index. It is widely used in metal, medicine, food, plastic, mineral and other fields. Features: 1. A new generation of intelligent operating system, precise control operation through 7-inch LCD display. 2. The self-checking function of the communication between the host computer and the accessories makes it clear to the operator. 3. Choose one of the two measurement modes, and set the tapping time or the number of vibrations at will. 4. Touch the screen to select the vibration height, and it will automatically print to the report. 5. In addition to the preset speed, the user can set any speed to meet special needs. 6. In addition to the preset vibration frequency, the user can set any vibration to meet special needs. 7. Real-time display of the working parameters of the instrument during the measurement process. 8. Connect with the electronic scale through the RS-232 interface, and display the value of the electronic scale in real time. 9. With one touch, it will be automatically printed, and a detailed measurement report will be presented to you. 10. While measuring the tap density, measure the fluidity of the powder. Technical Parameters: Measurement characteristics: tap density and fluidity, etc. Loading volume: 5-250 mL (users can set at will) Timing range: 0-99999 seconds (users can set at will) Counting range: 0-99999 times (users can set at will) Vibration height: 3 or 14 mm Vibration frequency: 250 or 300 rpm (users can set at will) Size: length 33x width 31x height 23cm (the height of the measuring cylinder is not included) Voltage: 220V/50Hz Weight: 16 kg
Introduction: LABULK 0335 tap density meter is an instrument used to measure the tap density of powder. The instrument consists of a touch screen operation panel, vibration components, motor, printer, electronic balance and measuring cylinder. The LABULK 0335 tap density meter, developed according to international and domestic standards, works according to the set speed and tap height. The measuring cylinder for the dry powder sample placed on the vibrating component vibrates up and down to measure the tap density of the powder. . The instrument can set the measurement parameters at will, and can automatically measure and print. In addition to the tap density, it can also automatically measure and calculate the powder fluidity and other indexes such as the Hausner Ratio and the degree of compression specified in the Chinese Pharmacopoeia 2020. index. It is widely used in metal, medicine, food, plastic, mineral and other fields.
