L-level photochemical reaction system Introduction: The L-grade photochemical synthesis system is named L-grade because its reaction processing capacity is on the order of liters. The L-level photochemical synthesis system is a flow reactor under illumination, mainly used for small and medium-sized scale photochemical reactions, providing basic support for subsequent larger scale production equipment, especially for pharmaceutical synthesis, raw material drug intermediates, and fine chemical photochemical synthesis processes. It can also be used for photocatalytic reaction research in the laboratory. Application areas: 1. Synthesis of pharmaceutical molecules 2. Organic photo synthesis 3. Synthesis of Fine Chemicals 4. Liquid phase photocatalytic reaction characteristic: 1. High power density flexible light source, long service life, customizable spectral bands; 2. Customizable dual light sources can be used to improve illumination efficiency or for two-step continuous reactions with dual wavelength modulation; 3. Tube kettle series connection mode, realizing a semi intermittent circulating flow system and improving the conversion efficiency of raw materials; 4. Equipped with an L-shaped continuous flow tube photoreactor for enhanced mixing, reducing side reactions caused by excessive local concentration; 5. Double water bath cooling of material kettle and reaction tube to reduce side reactions caused by heat; 6. Compatible with various heterogeneous reaction systems such as liquid-liquid, liquid-solid, gas-liquid, etc; 7. The material conveying process can be monitored for easy control of reaction progress and regulation of reaction conditions; 8. The historical operating data of the reaction system can be viewed and exported. Technical parameters: 1. Reaction module Reactor material: high borosilicate glass; Light reaction tube volume: 1.2 L; Inner diameter of photoresponsive tube: 40mm; Applicable temperature: room temperature; Applicable pressure: atmospheric pressure; 2. Light source module Light source type: flexible LED; Light source wavelength: standard 240 nm, can be customized according to needs; Light source power: Standard 600 W, can be customized according to needs; 3. General parameters Circulating flow rate: ≤ 0.65 m/s; Raw material reaction kettle capacity: 5 L, can be customized according to needs, and a light source can be added; Exterior dimensions: 930 × 600 × 1500 m3;
Introduction: The L-grade photochemical synthesis system is named L-grade because its reaction processing capacity is on the order of liters. The L-level photochemical synthesis system is a flow reactor under illumination, mainly used for small and medium-sized scale photochemical reactions, providing basic support for subsequent larger scale production equipment, especially for pharmaceutical synthesis, raw material drug intermediates, and fine chemical photochemical synthesis processes. It can also be used for photocatalytic reaction research in the laboratory.
