Introduction:
Kubo-X2000 is a high performance, multi-control unit physical adsorption analyzer mainly used in the microporous field. It has advanced technology, excellent quality, more comprehensive theoretical model and excellent test accuracy to meet scientific research and academic discussion. And so on a variety of application needs. Instrument performance advantages 1. There are three sets of high-performance micro-hole sample workstations, each with 3 analysis positions, up to 9 samples can be analyzed simultaneously, each workstation has an independent control system 2. The specific surface area is below 1m2/g The sample can be accurately measured using nitrogen. 3. Microwell interval test performance is superior, data points are large, and relative pressure (P/P0) can obtain accurate data in the range of 10-6 to 10-8. 4. Each workstation has independent control. System with higher efficiency 5. Specific surface area test takes < 90 minutes Features:
1. Specific surface area rapid testing technology
2. Dead volume dynamic calibration technology
3. Dynamic adjustment of vacuum pumping speed and gas injection volume
4. Pressure test B-ST technology
5. Ultra-high vacuum bistable valve body and integrated manifold pneumatic system
6. The host embeds a super stable Windows CE touch system with dual control system
7. Molecular pump set with pressure assisted control module for higher vacuum efficiency
8. Independent parallel pressure detection system Technical Parameters:
Analytical method: vacuum static capacity method
Test data: lower specific surface area is better than 0.0005m2/g to no known upper limit
Microporous analysis 0.35~2nm
Mesoporous analysis 2~50nm
Macroporous analysis 50~500nm
Analysis accuracy: repeatability error is less than ±1%
Number of analysis stations: 3 analysis bits/group, 3 groups (multi-station, independent operation)
Dewar volume: 4L
Number of Dewar bottles: 3
Sample tube volume: 10mL
Adsorbed gases: N2, H2, Kr, CO, CO2, CH4, etc.
Analytical temperature: suitable for a variety of cooling media
Sample preparation: independent 9-station sample preparation station (vacuum degassing station), with independent temperature control system and vacuum system, temperature upper limit 400 °C, equipped with independent mechanical pump, processor controlled by computer
Introduction:
Kubo-X2000 is a high performance, multi-control unit physical adsorption analyzer mainly used in the microporous field. It has advanced technology, excellent quality, more comprehensive theoretical model and excellent test accuracy to meet scientific research and academic discussion. And so on a variety of application needs. Instrument performance advantages 1. There are three sets of high-performance micro-hole sample workstations, each with 3 analysis positions, up to 9 samples can be analyzed simultaneously, each workstation has an independent control system 2. The specific surface area is below 1m2/g The sample can be accurately measured using nitrogen. 3. Microwell interval test performance is superior, data points are large, and relative pressure (P/P0) can obtain accurate data in the range of 10-6 to 10-8. 4. Each workstation has independent control. System with higher efficiency 5. Specific surface area test takes < 90 minutes
