Introduction: Five-sided heating box furnace KSL-1200X-5L-UL is specially designed for alloys and other annealing of metal materials with high temperature field uniformity. Heating elements are installed on all five sides of the furnace chamber. Better temperature field uniformity. In addition, the bottom of the chamber is equipped with silicon carbide plates, which can withstand a maximum weight of 100 kg. Features: 1, using a double shell structure, with air cooling system, making the shell surface temperature <60 °C. 2. Furnace adopts high-purity alumina material, and the surface of the inner furnace is coated with alumina imported from the United States, which can increase the reflectivity and heating efficiency and extend Service life. 3, using the left side, right side, front, back, bottom five heating. A uniform temperature field can be obtained. 4. The silicon carbide plate is installed on the bottom of the chamber and can weigh up to 100kg. 5. Use dual thermocouple dual meters for temperature control and detection to ensure that no over-temperature conditions occur. 6. The vents provided at the top can discharge the corrosive gases and moisture in the furnace cavity to extend the service life of the heating element. 7, using PID controller, you can set 30 paragraphs of heating and cooling procedures. 8, using dual meters and OMEGA's bipolar K-type super armored thermocouple, a pole control temperature acquisition, a pole alarm temperature acquisition, when the two pole temperature When the difference is too large, there will be an alarm and the main line will be cut off in time. 9, the control panel has RS485 communication interface. 10, has passed CE certification, and all electrical components have passed UL certification. Technical Parameters: Power supply: single-phase AC208V-2400V 50Hz/60Hz 8.8KW 45A Furnace door: open side Furnace: 400mm×400mm×400mm, 64L Heating element: molybdenum-doped iron chromium aluminum alloy Operating temperature: up to 1200°C (<1h), continuous operation 100-1150°C The fastest heating rate: 20 °C/min Temperature control accuracy: ±1°C Temperature uniformity: ±5°C (measurement space 250mm×250mm×250mm, temperature 1000°C, constant temperature time 3h) Thermocouple: OMEGA's bipolar K-type super armored thermocouple Size: 680mm×700mm×700mm Optional accessories 1, temperature control software 2, can be installed in the rear of the furnace inlet and outlet, into the furnace cavity into the inert gas or N2.
Introduction: Five-sided heating box furnace KSL-1200X-5L-UL is specially designed for alloys and other annealing of metal materials with high temperature field uniformity. Heating elements are installed on all five sides of the furnace chamber. Better temperature field uniformity. In addition, the bottom of the chamber is equipped with silicon carbide plates, which can withstand a maximum weight of 100 kg.
