Introduction:
1100 °C micro box furnace (1L) KSL-1100X-S is a heating element resistance wire, the maximum temperature can reach 1100 °C, continuous operation at 1000 °C; pull down the door structure, easy to take samples; Vented interface for use in oxygen or inert gas environments. This machine has the advantages of small size, light weight, balanced temperature field, rapid temperature rate, and energy saving. In addition, the machine can be placed in a glove box and sintered under vacuum and controlled atmosphere. It is an ideal equipment for high-temperature sintering, metal annealing and quality inspection in universities, research institutes and industrial and mining enterprises. Features:
1. High-purity alumina polycrystalline fiber material can minimize energy loss.
2. The surface of the inner furnace is coated with alumina imported from the United States, which can increase the reflectivity and heating efficiency and prolong the service life. Energy-saving and environmental protection, lower than 30% of the power consumption of other products in the same category.
3, the use of pull-down furnace door structure, easy to take samples. With a protection switch, the power supply is automatically switched off when the oven door is opened.
4, with inlet and outlet ports, can be used for oxygen or inert gas processing samples (need to install).
5, using PID controller, you can set 30 paragraphs of heating and cooling procedures.
6, has passed CE certification. Technical Parameters:
Power supply: 110V/220V 50Hz 700W/1KW
Furnace door: drop down
Furnace: 100mm×100mm×100mm
Heating element: resistance wire
Working temperature: up to 1100°C(<1h), continuous work 1000°C
Maximum heating and cooling rate: 30°C/min
Temperature control accuracy: ±1°C
Thermocouple: Type K
Inlet and Outlet: Ø8mm Pagoda Connector
Size: 200mm × 230mm × 360mm;
Weight: 8kg
Standard accessories thermocouple 1
Tile 1
Pliers 1
High temperature gloves 1 pair
Optional accessories
1, aluminum oxide
2, brick
3, high temperature gloves
Introduction:
1100 °C micro box furnace (1L) KSL-1100X-S is a heating element resistance wire, the maximum temperature can reach 1100 °C, continuous operation at 1000 °C; pull down the door structure, easy to take samples; Vented interface for use in oxygen or inert gas environments. This machine has the advantages of small size, light weight, balanced temperature field, rapid temperature rate, and energy saving. In addition, the machine can be placed in a glove box and sintered under vacuum and controlled atmosphere. It is an ideal equipment for high-temperature sintering, metal annealing and quality inspection in universities, research institutes and industrial and mining enterprises.
