Introduction: Fast ash analyzer is a new type of special equipment for measuring the ash content of coal or other flammable substances. The sample to be tested on the conveyor chain, with the chain into the high temperature combustion, and then sent out of the furnace. As the sample is slowly into the high temperature zone, thus avoiding the deflagration of the sample. In addition, the transmission chain steplessly adjustable speed, according to the requirements of the sample change ashing time. Scope of application: Suitable for coal, electricity, metallurgy, scientific research and other industries and departments to determine the ash content of coal, coke and other combustible materials. KH-3 rapid ash analyzer is a new type of coal analysis equipment, mainly for coal and coke ash. The instrument to the national standard GB212 "industrial analysis of coal," based on the application of high-tech design and production, with accurate, fast and efficient, energy-saving features. Features: 1. Furnace with inclined assembly, the natural circulation of air, the sample can get enough combustion air, compared with the traditional high temperature furnace ashing method, greatly reducing the ash time. 2. In the longer furnace can form an ideal temperature gradient, the sample gradually from the low temperature into the high temperature zone, similar to the slow ash process to solve the high temperature furnace ash method is not easy to solve the deflagration problem and improve the measurement accuracy. 3. The use of chain transfer, continuous automatic access to the sample, and the speed is adjustable, the determination of the effect is 4-5 times higher temperature furnace. 4 users can according to different samples, adjust the operating speed of both combustion time, the sample was fully burned. 5. Energy-saving: energy consumption for the general high-temperature furnace, one-third. 6 using SCM technology, automatic measurement and real-time control, temperature and current correction, high degree of automation. 7. Using high-brightness LED digital display, intuitive, accurate, stable and reliable performance. 8. The chain drive, continuous automatic transmission, stable operation, and adjustable speed. 9. Compared with the muffle furnace, the instrument has a good method and the method has been incorporated into the national standard; the measurement accuracy is high and the error is small; the measurement speed is fast, the efficiency is 4-5 times that of a muffle furnace; One part. Technical Parameters: Temperature range: 100-1000 ℃ Temperature measurement accuracy: 0.2 temperature control accuracy: ± 10 ℃ Furnace length: 700mm Constant temperature zone length: ≥200mm Transmission speed: (15-70) mm / min Temperature zone length: 815 ℃ ≮ 150mm, temperature ≯ ± 10 ℃ Heating time: (from room temperature to 815 ℃) 45min Chain running speed: 15-70mm / min (ashing time 15-50min) Measurement accuracy: better than GB212 standards Power: 3KW Working power: 220V ± 22V, 50HZ ± 1HZ Overall dimensions (mm): 1200 × 420 × 505
Introduction: Fast ash analyzer is a new type of special equipment for measuring the ash content of coal or other flammable substances. The sample to be tested on the conveyor chain, with the chain into the high temperature combustion, and then sent out of the furnace. As the sample is slowly into the high temperature zone, thus avoiding the deflagration of the sample. In addition, the transmission chain steplessly adjustable speed, according to the requirements of the sample change ashing time. Scope of application: Suitable for coal, electricity, metallurgy, scientific research and other industries and departments to determine the ash content of coal, coke and other combustible materials. KH-3 rapid ash analyzer is a new type of coal analysis equipment, mainly for coal and coke ash. The instrument to the national standard GB212 "industrial analysis of coal," based on the application of high-tech design and production, with accurate, fast and efficient, energy-saving features.
