KH-20S Karl Fischer Heating Furnace Introduction: The KH-20S Kashgar heating furnace adopts a touch screen display, and the instrument status information is clear at a glance, simple to learn, and easy to operate. The gas flow rate is controlled by electronic flow control with a temperature control accuracy of 0.1 ℃ and an airflow accuracy of 1ml/min. It has temperature protection function in temperature control mode and temperature curve display. The instrument adopts an automatic puncture injection mode, which can reduce manual operation interference and make the testing more stable. This device can be used in conjunction with Hegong's self-produced Karl Fischer moisture analyzer, which can meet multiple choices under different environments and user needs. It can meet the moisture testing requirements of users in industries such as lithium batteries, plastics, pharmaceuticals, adhesives, environmental protection, and petrochemicals. characteristic: 1. Touch screen display, instrument status information is clear at a glance, easy to learn, and convenient to operate 2. The gas flow rate is controlled by electronic flow control with a temperature control accuracy of 0.1 ℃ and a gas flow accuracy of 1ml/min 3. Temperature control mode: constant temperature analysis mode, programmed heating mode 4. Temperature curve display: By combining the heating curve and moisture measurement curve, the optimal temperature for sample analysis can be determined 5. Injection mode: Automatic puncture injection mode, reducing manual operation interference and ensuring more stable testing 6. Temperature protection: If the measured temperature exceeds the protection value, an alarm will be triggered to remind and stop heating Technical parameters: Display mode: 5-inch touch screen Temperature control range: room temperature~260 ℃ Heating rate: 15 ℃/min (below 200 degrees) Input gas source: dry air/nitrogen (99.99%) Output voltage stabilization range: 0~0.4Mpa Flow accuracy: 1ml/min Injection method: Puncture method Temperature control increment: 0.1 ℃ Temperature control accuracy: 0.1 ℃ Heating order: 3 orders Maximum input pressure: 0.6Mpa Flow range: 0~100ml/min Sample bottle specifications: 10ml and 20ml Power: 300W; 220V/50Hz
Introduction: The KH-20S Kashgar heating furnace adopts a touch screen display, and the instrument status information is clear at a glance, simple to learn, and easy to operate. The gas flow rate is controlled by electronic flow control with a temperature control accuracy of 0.1 ℃ and an airflow accuracy of 1ml/min. It has temperature protection function in temperature control mode and temperature curve display. The instrument adopts an automatic puncture injection mode, which can reduce manual operation interference and make the testing more stable. This device can be used in conjunction with Hegong's self-produced Karl Fischer moisture analyzer, which can meet multiple choices under different environments and user needs. It can meet the moisture testing requirements of users in industries such as lithium batteries, plastics, pharmaceuticals, adhesives, environmental protection, and petrochemicals.
