KH-1S Karl Fischer Heating Furnace Introduction: The KH-1S card type heating furnace adopts classic bottle heating technology, with simple instrument design, easy installation, and stable and reliable results. The dual heat source heating technology and dual injection mode can meet multiple choices under different environments and user needs. When combined with the self-produced Karl Fischer moisture analyzer from Hegong, this equipment can meet the requirements of users in industries such as pipeline building materials, medical equipment, biopharmaceuticals, and electronic materials for complex sample moisture testing. characteristic: 1. Adopt AI artificial intelligence adjustment algorithm with self-tuning (AT) function 2. It can be connected to a Coulombic moisture analyzer or a volumetric moisture analyzer for use 3. Compatible with 10mL/20mL headspace sample bottles, allowing for flexible selection based on the sample 4. Integrated molding, dual heat source heating technology, faster heating rate 5. Supports two injection methods: puncture and screw injection 6. Needle valve regulates gas flow rate 7. Equipped with over temperature protection function, the set temperature can be customized Technical parameters: Control range: 40 ℃~300 ℃ (recommended~260 ℃) Stability (within 40 minutes): ± 0.5 ℃ Furnace temperature control: ± 1 ℃, center temperature of headspace injection bottle ± 5 ℃ Heating rate: 20 ℃/min (below 100 ℃), 10 ℃/min (above 200 ℃) Overheating protection: available Input pressure: 0.3-0.4MPa (regulated by the stabilizing valve of the external air source, not exceeding 0.6Mpa) Flow range: 0~100mL/min (needle valve adjustment) Filtering device: drying bottle: (100ml x 2) Injection method: puncture and twisting Sample bottle specification: 10mL (optional 20mL) Lifting method: manual lifting Heating companion tube temperature control interface: 12V/5W DC interface Carrier gas input interface: 3mm quick plug connector Drying bottle interface: 3mm quick connector x 2 Heating companion gas interface: 3mm quick plug connector Power supply: AC 220V, allowable voltage fluctuation range ± 10%, 50/60 Hz Power: 300W Fuse: 2A/250V Room temperature: 5-40 ℃ Humidity:<65%
Introduction: The KH-1S card type heating furnace adopts classic bottle heating technology, with simple instrument design, easy installation, and stable and reliable results. The dual heat source heating technology and dual injection mode can meet multiple choices under different environments and user needs. When combined with the self-produced Karl Fischer moisture analyzer from Hegong, this equipment can meet the requirements of users in industries such as pipeline building materials, medical equipment, biopharmaceuticals, and electronic materials for complex sample moisture testing.
