Introduction: Nitrox analyzer: Nitrox analyzer adopts imported electrochemical, ion current, zirconia or magnetic oxygen sensor, and is a new intelligent industrial-grade gas analyzer developed by combining advanced MCU technology. It is widely used in the real-time detection and analysis of high-concentration oxygen in large-scale air separation high-purity oxygen, medical and industrial oxygen generators, smelting industry, medical and health, petrochemical, environmental protection, electronic power and other industries. Features: 1. No reference gas is required, and it is not affected by the oxygen concentration in the working environment; 2. Imported limit current sensor is adopted, which has the characteristics of fast response speed, high accuracy, and long calibration period; 3. Built-in compensation function and sensor protection function, the analyzer can be powered on in 99.99% of the environment without affecting the life of the sensor; 4. Embedded installation method makes the installation simple and convenient; 5. Built-in temperature compensation function, the size of the sample gas flow will not bring errors to the sensor measurement; 6. The altitude measurement module can be expanded to avoid the influence of atmospheric pressure changes on the measurement accuracy; 7. Any point calibration can meet the measurement accuracy of the entire range, and the operation is simple and convenient. technical parameter: Measuring principle: ion current (limit current) Display mode: LCD display Measuring range: 10.00%-99.99% O2 Resolution: 0.01% Allowable error: ≤±1%F.S Repeatability: ≤±1% Response time: T90≤30S Analog output: 4-20mA.DC (non-isolated output, load resistance is less than 500 ohms) 0-5V.DC (non-isolated output, load resistance is greater than 10k ohms) 1 way programmable dry contact passive alarm output, contact. Large capacity 220VAC/2A Other interfaces: RS232 (default) or RS485 Power supply: AC85-264V 50/60Hz Sampling method: access type Sample gas temperature: -10-+50℃ Sample gas flow: 300-600ml/min Sample gas pressure: 0.05Mpa ≤ inlet gauge pressure ≤ 0.35Mpa, stabilized atmosphere Background gas: mixed gas such as N2 and inert gas Specification size: 190mm×110mm×235mm(W×H×D) Hole size: 170mm×90mm (W×H) Service life: Type C>12 months, Type D>12 months (under normal use conditions) Pneumatic interface: Φ6 plastic pipe joint (built-in sensor) Installation method: Embedded
Introduction: Nitrox analyzer: Nitrox analyzer adopts imported electrochemical, ion current, zirconia or magnetic oxygen sensor, and is a new intelligent industrial-grade gas analyzer developed by combining advanced MCU technology. It is widely used in the real-time detection and analysis of high-concentration oxygen in large-scale air separation high-purity oxygen, medical and industrial oxygen generators, smelting industry, medical and health, petrochemical, environmental protection, electronic power and other industries.
