Introduction: The blasting tester is a testing device that measures the pressure resistance test and the instantaneous burst pressure of pressure vessels such as fire extinguisher cylinders, pressure tanks, non-metallic pipe materials, and hose assemblies in accordance with national standards. Widely used in non-metallic pipe, pipe fittings and pressure vessel production plant for the production of its product inspection, product development research. The equipment consists of microcomputer control and PLC module automatic control unit. The equipment automatically performs graphics processing, data processing, and data management. According to the PLC program instructions, the pressure is controlled automatically according to the pressure rate to achieve the target pressure. The microcomputer control test process is used to display the pressure value, test time, and test state in real time. The data processing analysis is performed by using a microcomputer. The test results can be automatically saved. After the test, the test curve can be retrieved again, and the test procedure can be reproduced by traversing the curve, or Curve comparison, curve enlargement, test software under the Chinese language Windows platform, with strong data and graphics processing capabilities, can instantly print a complete test report and test curve. Just set the relevant parameters, you can automatically complete the test according to the program. The equipment has an audible and visual alarm indication. During the test, the alarm indicator is displayed as "yellow". The test is completed and the "green light" is displayed. The test is completed or abnormally interrupted and an alarm sound is issued. Fourth, the implementation of standards: meet the relevant requirements of GB / T 6111-2003, GB / T 15560-1995, GB / T 18997.1-2003, GB / T 18997.2-2003. Technical Parameters: 1, the maximum pressure: 16 MPa; 2, pressure accuracy: - 1% to + 2%; 3, constant pressure range: 5% ~ 100%; 4, control pressure accuracy: ± 2%; 5, timing accuracy: ≤ ± 0.1%; 6, timing range: 0.1min ~ 1000h; 7, temperature range: room temperature; 8, the number of test routes: 1 Road; 9, test medium: water; 10, water source standards: tap water (no visible particulate impurities can drink standard); 11, power supply: 380V 3KW.
Introduction: The blasting tester is a testing device that measures the pressure resistance test and the instantaneous burst pressure of pressure vessels such as fire extinguisher cylinders, pressure tanks, non-metallic pipe materials, and hose assemblies in accordance with national standards. Widely used in non-metallic pipe, pipe fittings and pressure vessel production plant for the production of its product inspection, product development research. The equipment consists of microcomputer control and PLC module automatic control unit. The equipment automatically performs graphics processing, data processing, and data management. According to the PLC program instructions, the pressure is controlled automatically according to the pressure rate to achieve the target pressure. The microcomputer control test process is used to display the pressure value, test time, and test state in real time. The data processing analysis is performed by using a microcomputer. The test results can be automatically saved. After the test, the test curve can be retrieved again, and the test procedure can be reproduced by traversing the curve, or Curve comparison, curve enlargement, test software under the Chinese language Windows platform, with strong data and graphics processing capabilities, can instantly print a complete test report and test curve. Just set the relevant parameters, you can automatically complete the test according to the program. The equipment has an audible and visual alarm indication. During the test, the alarm indicator is displayed as "yellow". The test is completed and the "green light" is displayed. The test is completed or abnormally interrupted and an alarm sound is issued. Fourth, the implementation of standards: meet the relevant requirements of GB / T 6111-2003, GB / T 15560-1995, GB / T 18997.1-2003, GB / T 18997.2-2003.
