JXKLZ-310 vacuum stirring defoamer Introduction: Vacuum stirring and defoaming machine is a device used to remove bubbles from liquids or slurries. It uses non-contact stirring and centrifugal vacuum extraction principles to provide a vacuum environment during the mixing and defoaming process of the mixture, in order to accelerate the discharge of bubbles. The stirring and defoaming time is generally around 3 minutes. Suitable for mixing, stirring, and defoaming conductive/resistive materials such as gold/silver/carbon paste, polymer new materials, sealing/insulating materials such as glass/ceramic paste, sealing materials/adhesives such as chemical breeding materials, medical, food, single and double liquid epoxy resins, and molding materials such as LED fluorescent agents/silicone gel. It can mix evenly and detach nano scale bubbles from materials without dead corners. characteristic: 1. The spiral bevel gear made of imported material MC901 has high transmission efficiency, stable transmission ratio, and low noise; 2. The maximum centrifugal gravity generated by rotation and revolution is nearly 400G, which effectively disperses and removes bubbles, improving the quality and stability of the product; 3. Vacuum defoaming, powerful vacuum pump, removes nano bubbles from the material; 4. No spiral blades, achieving mixing and dispersion inside the container without damaging material properties; 5. Multi functional application that can store multiple sets of programs to meet the mixing and defoaming needs of different materials; 6. No need for cleaning, will not contaminate or damage the properties of materials (especially fibrous materials); 7. Human computer interaction, easy to operate; Ultra small and lightweight optimized design; Technical parameters: Model: JXKLZ-310 Usage: Suitable for dispersing, mixing, and defoaming multi-component materials (such as silicone, multi-component epoxy resins, etc.) Standard container: 300ml * 2 (HDPE diameter 78x90) or 150ml * 2 (HDPE diameter 60 * 72) Processing capacity: ≤ 180ml Revolution: 100-2000rpm stepless speed regulation, input according to user's actual needs, step by 1rpm Rotation: Constant speed ratio 1:1 Set time: 0-1800s * 5 (five steps in total), continuous running time of 30 minutes; Regular time within 1-3 minutes Parameter storage capacity: 10 sets Vacuum degree of the whole machine: -95KPa; Vacuum source: Equipped with advanced vacuum oil pump (14m3/hour) Vacuum setting: Vacuum independent switch with vacuum delay function Bearing: NSK bearings from Japan Control system: human-machine dialogue, Chinese interface, touch screen operation Balance adjustment: Dual cup configuration for balance, single cup testing with counterweight Transmission method: Spiral umbrella gear transmission Working principle: public rotation wingless centrifugal gravity mode Open lid protection: Open lid cannot operate Applicable temperature and humidity: 10-40 ℃; 20-80% RH (no thick fog like moisture, sufficient) Voltage: AC220V ± 5%; 1-Phase; 50~60Hz Rated power: 1500w Dimensions: L850xW520xH450mm
Introduction: Vacuum stirring and defoaming machine is a device used to remove bubbles from liquids or slurries. It uses non-contact stirring and centrifugal vacuum extraction principles to provide a vacuum environment during the mixing and defoaming process of the mixture, in order to accelerate the discharge of bubbles. The stirring and defoaming time is generally around 3 minutes. Suitable for mixing, stirring, and defoaming conductive/resistive materials such as gold/silver/carbon paste, polymer new materials, sealing/insulating materials such as glass/ceramic paste, sealing materials/adhesives such as chemical breeding materials, medical, food, single and double liquid epoxy resins, and molding materials such as LED fluorescent agents/silicone gel. It can mix evenly and detach nano scale bubbles from materials without dead corners.
