Brief introduction JT-C60 Moisture meter for walls and floors is a high-performance and digital moisture testing equipment firstly launched in our country by our company based on introduction of foreign advanced technology. The instrument is widely used in rendering of paints, flooring installation, floor construction, building, leakage inspection and repairing of houses, chimney cleaning, indoor and outdoor decoration and other industries requiring quick measurement of moisture, such as moisture measurement of walls, cement floor, wall tiles, marble, gypsum board, concrete, etc. This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words, there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter. Features 1. JT-C50 Moisture meter adopts high frequency principle and display of digital LCD screen. Its probes are integrated with the main unit. 2. When measuring the moisture of walls and floors, there is no need to drill a hole on the targeting objects. Just place the probes on the surface of the targeting objects, then its moisture will be measured. Therefore, no damage will be brought to the surface of the objects. 3. JT-C50 Moisture meter is characterized in wide moisture-measuring scope, reliable performance and fast measurement. The measuring result will be obtained within one second. 4. Small volume and light weight of the instrument enable the workers to carry it conveniently and conduct on-site measurement quickly. Thus, it is of great help for the on-site workers in moisture measurement. Technical parameters Scope of Moisture Measurement: 0~40% Applicable temperature: -5℃~+60℃ Preciseness: ±0.5% Response time: 1 second Ways of display: 3½ bit digital LCD screen Scanning depth of electromagnetic wave: 50mm Gear shift: 0~10 Power supply: 9V(6F22 type), a packed cell Volume: 160×60×27(mm) Weight: about 200g
Brief introduction JT-C60 Moisture meter for walls and floors is a high-performance and digital moisture testing equipment firstly launched in our country by our company based on introduction of foreign advanced technology. The instrument is widely used in rendering of paints, flooring installation, floor construction, building, leakage inspection and repairing of houses, chimney cleaning, indoor and outdoor decoration and other industries requiring quick measurement of moisture, such as moisture measurement of walls, cement floor, wall tiles, marble, gypsum board, concrete, etc. This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words, there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter.
