Features: 1.The whole machine adopts imported P.V.C panel system, strong structure, never deformation, high temperature and acid and alkali resistant never aging. 2.Using automatic/manual water system with water shortage can add water the function of automatic/manual, test don't interrupt, insufficient water level alarm display. 3.Precision glass nozzle the fog spread evenly, and naturally fall on the specimen, ensure no crystallization salt blocks. 4.Control instrument are in the same machine board, easy to operate, and be clear at a glance. 5.Attach double overtemperature protection, insufficient water level warning, ensure use safety. 6.Inlet temperature controller with manual and automatic control mode, the use of digital display, P.I.D control, error of plus or minus 0.1 ℃, the maximum setting time is up to 999 HRS. 7.Laboratory used direct steam heating mode, heating speed and uniform, shorten the standby time. 8.Spray tower with conical disperser, guide the fog, fog and even fall mist, and other functions. 9.Pressure barrels by Henry's law, heating humidifying, and to provide laboratory required humidity. 10.Add large model test of the tank cover to pneumatic cylinder automatic mode switch, easy to operate and safety. 11.After the completion of the test, with automatic mist device, the sample (s) can be observed clearly of indoor experiment. 12.Can be customized salt dry-wet compound salt spray testing machine and salt fog test. Technical parameters: Model: JST - 090 Laboratory size: 90 * 60 * 50 CM Equipment material: imported PVC sheet & P.P Laboratory temperature: salt water test (NSS ACSS) 35 + / - 1 ℃ corrosion test method (CASS) 50 + / - 1 ℃ Saturated air barrel temperature: salt water test (NSS ACSS) 37 + / - 1 ℃ corrosion test (CASS) 63 + / - 1 ℃ Spray volume: 1.0 ~ 2.0 / ml / 2000 px2 / hr PH PH: salt water test (NSS ACSS6.5 ~ 7.2) corrosion test method (CASS) 3.0 ~ 3.2 Laboratory displacement L: 108 270 480 800 1440 Power supply: AC 220V * 10A
Features: 1.The whole machine adopts imported P.V.C panel system, strong structure, never deformation, high temperature and acid and alkali resistant never aging. 2.Using automatic/manual water system with water shortage can add water the function of automatic/manual, test don't interrupt, insufficient water level alarm display.
3.Precision glass nozzle the fog spread evenly, and naturally fall on the specimen, ensure no crystallization salt blocks. 4.Control instrument are in the same machine board, easy to operate, and be clear at a glance. 5.Attach double overtemperature protection, insufficient water level warning, ensure use safety. 6.Inlet temperature controller with manual and automatic control mode, the use of digital display, P.I.D control, error of plus or minus 0.1 ℃, the maximum setting time is up to 999 HRS. 7.Laboratory used direct steam heating mode, heating speed and uniform, shorten the standby time. 8.Spray tower with conical disperser, guide the fog, fog and even fall mist, and other functions. 9.Pressure barrels by Henry's law, heating humidifying, and to provide laboratory required humidity. 10.Add large model test of the tank cover to pneumatic cylinder automatic mode switch, easy to operate and safety. 11.After the completion of the test, with automatic mist device, the sample (s) can be observed clearly of indoor experiment. 12.Can be customized salt dry-wet compound salt spray testing machine and salt fog test. Technical parameters: Model: JST - 090 Laboratory size: 90 * 60 * 50 CM Equipment material: imported PVC sheet & P.P Laboratory temperature: salt water test (NSS ACSS) 35 + / - 1 ℃ corrosion test method (CASS) 50 + / - 1 ℃ Saturated air barrel temperature: salt water test (NSS ACSS) 37 + / - 1 ℃ corrosion test (CASS) 63 + / - 1 ℃ Spray volume: 1.0 ~ 2.0 / ml / 2000 px2 / hr PH PH: salt water test (NSS ACSS6.5 ~ 7.2) corrosion test method (CASS) 3.0 ~ 3.2 Laboratory displacement L: 108 270 480 800 1440 Power supply: AC 220V * 10A
