Introduction: JSF-550 mixing sanding and dispersing multi-purpose machine is a new product designed with new foreign technology. The product integrates the functions of mixing, sanding and dispersing a variety of equipment, and is an ideal experimental equipment for laboratory personnel. Technical Parameters: 1. Motor parameters: 550W 220V 2.3A 0.1Hz~300Hz 2, frequency converter: 0.75kw 3, speed range: stepless speed regulation 0~7500r/min 4. Stirring and dispersing blade diameter: Ø50mmØ60mm 5. Sanding disc diameter: Ø45 mmØ60mm 6, lifting stroke; 280mm 7. Dimensions: 450×420×550 mm (length×width×height) 8, weight: 37 kg structure: 1. This machine adopts three-phase asynchronous motor, and the inverter directly displays the rotating shaft speed through variable frequency stepless speed regulation. The sanding disc and the dispersing blades are directly connected to the rotating shaft with threads. 2. The cylinder body adopts a jacketed structure, which can be cooled by water and processed with stainless steel material. Use and maintenance: 1. The sanding disc or the dispersing mixing blade to be used is fixed to the rotating shaft during use. 2. The two grippers are respectively mounted on the fixing frame, and the clamping rod is flat upward. 3. Loosen the column sleeve locking handle, adjust the height of the shaft and the container, then tighten the locking handle, clamp the container, put the material and cover the container. 4. Turn on the power. Please adjust the speed to zero before the equipment is running. At this time, the words “0.00” (frequency of the inverter) appear on the inverter display screen. Press the “RUN” operation key, the motor starts, and the motor fan runs. At this time, the words “0” appear on the inverter display screen (rotary shaft speed), rotate the speed control button on the inverter to adjust the speed to the required speed. The four digits of the inverter display screen directly show the speed of the current shaft. 5. When shutting down, first adjust the speed to zero, then press “STOP” to stop. At this time, the words “0.00” (frequency of the inverter) appear on the inverter display screen. Turn off the power. After about 8 seconds, “P OFF” appears on the screen and the screen turns off. 6, in order to avoid the danger, it is not recommended to directly press "STOP" to stop. Because the next time the machine is turned on, the inverter display screen will remember the frequency of the last operation. The screen display number will keep flashing. Pressing the “RUN” operation key will remember the rotation speed of the last stop. 7. When the grid voltage is at 198V, the idling phenomenon will occur (ie, the speed will suddenly rise). At this time, it is not appropriate to use the unit. 8. Wait at least 10 seconds after turning off the power to turn it on, otherwise it will cause idling. 9. It is not advisable to open an empty car when the speed is greater than 4000 rpm. 10. Since the motor drives the load, the actual speed and the no-load speed are slightly different. If the actual speed is not inconsistent with the no-load speed (the actual speed is far less than the no-load speed), the motor is in an overload state at this time. The machine will automatically stop working and the machine will stop. 11, the machine is guaranteed for one year, man-made damage is not covered by the warranty.
Introduction: JSF-550 mixing sanding and dispersing multi-purpose machine is a new product designed with new foreign technology. The product integrates the functions of mixing, sanding and dispersing a variety of equipment, and is an ideal experimental equipment for laboratory personnel.
