JLBG-208 mercury analyzer Introduction:
Analytical Instrument Factory is specialized in producing differential mercury analyzer manufacturers, the product uses a special mercury measurement technology, the sensitivity of cold atomic absorption method increased to nearly 1000 times, can be directly measured to 0.005ug / L. Broke the old idea of low sensitivity of cold atomic absorption. Instrument scope of application: The instrument is mainly used in the measurement of mercury content in surface water, groundwater and industrial waste water. It can also be used for the measurement of mercury content in waste gas and solid. Instrument departments: the various departments of the environmental monitoring system, geology, hydrology, health and epidemic prevention, water, environmental research institutes and large and medium-sized enterprises monitoring room, laboratory. Features:
1, high sensitivity instrument, no baseline drift, wide measurement range, good reproducibility
2, with data storage, query, print function
3, with the original graphics restore graphics
4, easy to operate, you can use Windows 2000 / XP operating system
5, ※ USB2.0 interface, computer control, high degree of automation
6, the instrument is simple, no memory effect, with direct reading measurement results
7, the chemical reagents used less variety, less, do not have high purity nitrogen carrier gas, the use of low cost Technical Parameters:
Detection limit: differential measurement: 0.01 (μg / L)
Repeatability (standard deviation): Differential measurement <5% (0.32 μ g / L)
Low concentration <3% (2 μg / L)
High concentration <3% (20 μg / L)
The best measurement range: differential measurement: (0.02-0.32) μg / L
Low concentration measurement: (0.2-4) μg / L
High concentration measurement: (2-100) μg / L
Correlation coefficient: differential measurement γ> 0.995
Low concentration measurement γ> 0.999
High concentration measurement γ> 0.999
Use of power: AC 220V30W
Operating temperature: 17 ℃ -30 ℃
Humidity: 20% -80% RH
Volume (horizontal): (42 × 30 × 16) ㎝
Weight: Net weight 15㎏.
Introduction:
Analytical Instrument Factory is specialized in producing differential mercury analyzer manufacturers, the product uses a special mercury measurement technology, the sensitivity of cold atomic absorption method increased to nearly 1000 times, can be directly measured to 0.005ug / L. Broke the old idea of low sensitivity of cold atomic absorption. Instrument scope of application: The instrument is mainly used in the measurement of mercury content in surface water, groundwater and industrial waste water. It can also be used for the measurement of mercury content in waste gas and solid. Instrument departments: the various departments of the environmental monitoring system, geology, hydrology, health and epidemic prevention, water, environmental research institutes and large and medium-sized enterprises monitoring room, laboratory.
