JL350-2J Batch Transfer Peristaltic Pump Introduction: The JL350-2J is mainly used in production settings, and this high flow peristaltic pump adopts an AC motor, variable frequency speed regulation, and high protection level. The combination structure of drum shaped rollers and concave pressure blocks ensures stable operation and minimal hose wear. The JL350-2J peristaltic pump can be used for high flow fluid transmission and can provide a flow range of ≤ 35L/min. The transparent protective cover allows for easy observation of the operation status of the peristaltic pump, with manual button control for speed, direction, and start stop. It can also be controlled through an external control interface, making the operation simple and reliable. This high flow peristaltic pump adopts a design that separates the frequency converter from the motor, making it easy for users to install and maintain. characteristic: 1. High power peristaltic pump with a maximum flow rate of 35L/min 2. Drum shaped roller and concave working surface structure, with hose self positioning function, avoiding unnecessary wear and extending hose life 3. Variable frequency speed regulation of AC deceleration motor 4. The gap between the pressure pipes can be adjusted 5. Strong power and reliable card installation 6. The transparent protective cover allows the operator to observe the operation of the pump Technical parameters: Speed range: 30-350 (rpm), reversible in both forward and reverse directions Speed adjustment resolution: 0.6rpm Control mode: knob combined with button, supporting external signal control and communication control Display mode: Inverter LCD display Speed control signal input: 0-5V, 0-10V, 4-20mA linear control Start stop control signal input: switch control Direction control signal input: switch control Communication interface: RS485 interface, Modbus RTU protocol Power off memory: After powering on again, you can continue working according to the state before the power off Dimensions (length x width x height): 417 x 401 x 321 (mm) Applicable power supply: AC 220V ± 20%/400W Working environment temperature: 0 ℃ -40 ℃ Relative humidity of working environment:<80% Protection level: IP55 Weight: 32Kg
Introduction: The JL350-2J is mainly used in production settings, and this high flow peristaltic pump adopts an AC motor, variable frequency speed regulation, and high protection level. The combination structure of drum shaped rollers and concave pressure blocks ensures stable operation and minimal hose wear. The JL350-2J peristaltic pump can be used for high flow fluid transmission and can provide a flow range of ≤ 35L/min. The transparent protective cover allows for easy observation of the operation status of the peristaltic pump, with manual button control for speed, direction, and start stop. It can also be controlled through an external control interface, making the operation simple and reliable. This high flow peristaltic pump adopts a design that separates the frequency converter from the motor, making it easy for users to install and maintain.
