JKC-WH Fully Automatic Temperature Controlled Flip over Oscillator Introduction: The JKC-WH fully automatic constant temperature controlled flipping oscillator is suitable for the leaching toxicity flipping method of solid waste. It is the equipment specified in the environmental protection industry standards of the People's Republic of China, "Solid Waste Leaching Toxicity Method - Sulfuric Acid and Nitric Acid Method" (HJ/T299-2007) and "Solid Waste Leaching Toxicity Method - Acetic Acid Buffer Leachate Method" (HJ/T300-2007). Widely applicable to industries related to environmental protection, solid waste disposal, and toxicity identification, research, treatment, and disposal of solid waste. It is also applicable to production experiments and scientific research in industries such as medicine, chemical engineering, and teaching. Fully functional, with high load-bearing capacity, stable rotational speed, long-term continuous stable operation, and low noise. Scope of application: Environmental monitoring, university laboratories, chemical plants, Academy of Agricultural Sciences, fertilizer plants, forestry departments, quality supervision, food and drug analysis, customs and other laboratories. Technical features: 1. Adopting microcomputer control, button operation, and LCD panel display. 2. Speed: 0-35 revolutions per minute, adjustable digital display; 3. Flip mode: It can rotate forward for a period of time with a few seconds interval and then reverse for another period of time, or it can rotate forward or reverse continuously; 4. Time setting: Full digital timing, seconds, minutes, and hours can be freely set with LS-99H99m; Can automatically stop. 5. Temperature control range: 5-65 ℃, with an accuracy not exceeding ± 0.5 ℃. 6. Safety device: Fully enclosed 360 degree flip, with flip cover power-off protection device and overload protection device. 7. The equipment complies with the standards of "Toxicity Methods for Solid Waste Leaching - Sulfuric Acid and Nitric Acid Method" (HJ/T299-2007) and "Toxicity Methods for Solid Waste Leaching - Acetic Acid Buffer Leachate Method" (HJ/T300-2007). 8. Sample quantity: 8.12.16; Special specifications can be customized. 9. Applicable containers: 2L glass bottles, PE bottles, and pollutant extraction containers, etc. 10. Material: Stainless steel anti-corrosion spray coating.
Introduction: The JKC-WH fully automatic constant temperature controlled flipping oscillator is suitable for the leaching toxicity flipping method of solid waste. It is the equipment specified in the environmental protection industry standards of the People's Republic of China, "Solid Waste Leaching Toxicity Method - Sulfuric Acid and Nitric Acid Method" (HJ/T299-2007) and "Solid Waste Leaching Toxicity Method - Acetic Acid Buffer Leachate Method" (HJ/T300-2007). Widely applicable to industries related to environmental protection, solid waste disposal, and toxicity identification, research, treatment, and disposal of solid waste. It is also applicable to production experiments and scientific research in industries such as medicine, chemical engineering, and teaching. Fully functional, with high load-bearing capacity, stable rotational speed, long-term continuous stable operation, and low noise. Scope of application: Environmental monitoring, university laboratories, chemical plants, Academy of Agricultural Sciences, fertilizer plants, forestry departments, quality supervision, food and drug analysis, customs and other laboratories.