JKC-600S water quality sulfide acidification blowing instrument Introduction: JKC-600S water quality sulfide acidification blowing instrument is used for the detection of sulfides in surface water, groundwater, domestic sewage, and industrial wastewater. It has the characteristics of easy control, simple and fast operation. Applicable standard: HJ1226-2021 Water quality - Determination of sulfides - Methylene blue spectrophotometric method GB/T5085.5-2007 Acid reactivity characteristic: 1. Large capacity reaction bottle, independent six unit module, capable of processing six samples simultaneously. 2. Constant temperature water bath heating, PID precise temperature control; Equipped with a fast automatic temperature control system to shorten analysis time. 3. The reaction bottle holder can be placed, which is resistant to strong acid and alkali corrosion, high temperature, and easy to mix and match samples. 4. The nitrogen flow rate of each sample is independently controlled and protected by dual safety valves to ensure the safe and effective conduct of the experiment. 5. Nitrogen constant blowing, gas source time can be timed and controlled, and the gas source will automatically shut off when the set time is reached. Technical parameters: Sample quantity: 6 sample units Heating method: Automatic temperature control and constant temperature water bath, one-time molding design, acid and alkali corrosion resistance, easy to clean! Heating power: 1500W, uniform heating Temperature range: Room temperature -99.9 ℃ Temperature control accuracy: ± 1 ℃ Sample reaction bottle specification: 500ml three necked reaction bottle Nitrogen inlet pressure: 0.1Mpa Nitrogen flow branch: 60-600mL/min
Introduction: JKC-600S water quality sulfide acidification blowing instrument is used for the detection of sulfides in surface water, groundwater, domestic sewage, and industrial wastewater. It has the characteristics of easy control, simple and fast operation. Applicable standard: HJ1226-2021 Water quality - Determination of sulfides - Methylene blue spectrophotometric method GB/T5085.5-2007 Acid reactivity
