Jipad-yx-24S circular water bath nitrogen blowing instrument Introduction: The circular water bath nitrogen blowing instrument independently developed, designed and produced by our company adopts internationally recognized technology, utilizing blowing and trapping technology. At the same time, it can control temperature and heat the sample, and achieve rapid, controllable, and continuous oxygen free concentration of the sample solution by blowing inert gases such as nitrogen to the surface of the sample. This method has the characteristics of time saving, convenience, and accuracy. Widely used in fields such as food safety, medicine, pesticide residue detection, clinical pharmacokinetics, etc. Features: 1. The test tube is fixed in position by a spring loaded test tube clamp and support plate, and the height and direction can be adjusted arbitrarily 2. Free lifting needle valve tube, each air duct can be independently lifted to a suitable height according to the size of the test tube and the amount of solvent Simultaneously adjustable needle valve energy tube controls gas flow 3. Circular structure, easy to rotate, convenient for sample holder to enter and exit the water bath, easy to operate, regulating valve: imported regulating valve 4. Intelligent digital temperature controller with timing and dual digital display, PID technology for adjustment, and the ability to achieve over temperature alarm and prevent dry burning 5. All components of the circular nitrogen blowing instrument are uniformly made of high-quality stainless steel and can withstand organic solvents such as acid and alkali. 6. The bottom is equipped with a ring spring support device, which can facilitate the entry and exit of the lifting bracket; 7. Different gas sources such as nitrogen or air can be used to purge the sample for concentration; 8. PID technology is used to adjust and achieve overtemperature alarm, water bath heating, mild and stable, and temperature control accuracy ± 1 ℃; 9. Low nitrogen consumption, specific adjustments can be made as needed; 10. Equipped with a rotor gas flow meter, which can control gas consumption; 11. Each nitrogen flow rate can be adjusted, making it convenient to handle different samples and saving gas sources. Nitrogen blowing needles with different thickness and specifications can be replaced as needed at any time 12. Humanized design, compact size, occupying * less space in the fume hood; Technical parameters: Number of sample digits: ≥ 24; Instrument size: approximately 360 × 820mm; The size range of the sample test tube that can accommodate samples is 10-29mm in diameter and 1-50ml in liquid volume; Gas flow rate: 0-15L/min; Temperature control range: room temperature~100 ℃; Sample holder: The circular type can rotate 360 degrees, and the operator can contact the sample from the front, making it easy to operate; Type of glassware placement: It can accommodate various specifications of glassware such as beakers, test tubes, centrifuge tubes, measuring cylinders, etc; Nitrogen needle use: The gas needle channel on the distribution chamber can be combined or used separately, and the height of the distribution chamber can be adjusted as needed.; Material: All parts in contact with solvents are made of high-quality stainless steel, with strong corrosion resistance;
Introduction: The circular water bath nitrogen blowing instrument independently developed, designed and produced by our company adopts internationally recognized technology, utilizing blowing and trapping technology. At the same time, it can control temperature and heat the sample, and achieve rapid, controllable, and continuous oxygen free concentration of the sample solution by blowing inert gases such as nitrogen to the surface of the sample. This method has the characteristics of time saving, convenience, and accuracy. Widely used in fields such as food safety, medicine, pesticide residue detection, clinical pharmacokinetics, etc.
