Jingxin98-III Cup type Ultrasonic Cell Grinder Introduction: Cup type ultrasonic crusher, also known as non-contact, is used for aseptic crushing and can break chromosomes and cells through a heart tube. Non contact cup-shaped container (suitable for handling biological hazardous materials and harmful samples) with noise reduction and compression device. Compared to traditional probe ultrasonic cell disruptors, the probe comes into direct contact with the sample and requires repeated use of the same probe, which can easily cause cross contamination of the sample. Due to the different depths at which the probe is inserted into the sample, the energy distribution of each ultrasound is also different, which affects the repeatability and accuracy of the experimental results. Multiple samples can be tested simultaneously with high experimental efficiency; No need to frequently operate the probe, all samples are in separate fully enclosed test tubes to avoid cross contamination; Optional SDC-6 low-temperature constant temperature bath, convenient for sample ultrasonic treatment in a 4 ° C water bath, with uniform energy distribution and ultrasonic effect; The ultrasound parameter settings are flexible, the experimental steps are standardized, the experimental reproducibility is good, and the results are highly reliable. Gradually becoming an indispensable standardized tool for ChIP (chromatin immunoprecipitation) and DNA splicing research platforms. The experimental efficiency is high, the results are reliable, and the repeatability is good. It can handle a sample of 5ul and is suitable for precious samples. Technical parameters: Model: Jingxin98-III Frequency: 19.5-20.5KHz Power: 1200W Crushing capacity: (0.1-2ml) * 4 Duty cycle: 1-99% Power supply: 220/110V ± 0.5 50Hz/60Hz Display mode: digital
Introduction: Cup type ultrasonic crusher, also known as non-contact, is used for aseptic crushing and can break chromosomes and cells through a heart tube. Non contact cup-shaped container (suitable for handling biological hazardous materials and harmful samples) with noise reduction and compression device. Compared to traditional probe ultrasonic cell disruptors, the probe comes into direct contact with the sample and requires repeated use of the same probe, which can easily cause cross contamination of the sample. Due to the different depths at which the probe is inserted into the sample, the energy distribution of each ultrasound is also different, which affects the repeatability and accuracy of the experimental results. Multiple samples can be tested simultaneously with high experimental efficiency; No need to frequently operate the probe, all samples are in separate fully enclosed test tubes to avoid cross contamination; Optional SDC-6 low-temperature constant temperature bath, convenient for sample ultrasonic treatment in a 4 ° C water bath, with uniform energy distribution and ultrasonic effect; The ultrasound parameter settings are flexible, the experimental steps are standardized, the experimental reproducibility is good, and the results are highly reliable. Gradually becoming an indispensable standardized tool for ChIP (chromatin immunoprecipitation) and DNA splicing research platforms. The experimental efficiency is high, the results are reliable, and the repeatability is good. It can handle a sample of 5ul and is suitable for precious samples.
