Introduction: U-tube oscillation method density meter, electronic liquid density meter is based on the principle of different oscillation frequencies when the double U-tube is filled with different media to measure the liquid density. After pumping the liquid to be tested into the resonant cylinder sensor, the single-chip microcomputer performs measurement data processing, which is fast, direct, and highly sensitive. It is composed of double tuning fork density sensor, vibrating tube circuit, temperature measurement circuit, CPU, display, constant temperature bath, liquid inlet pump and control panel. Use field: Petroleum, diesel, cleaning fluid, lubricating fluid, chemical liquid, flux, crude oil, chemical reagent, stupid, toluene, flavor and fragrance, essential oil, Density testing in alcohol and beverage industries can convert the concentration for alcohol and sulfuric acid solutions! Features: 1. Using the principle of U-tube vibration method, it is suitable for automatic measurement of liquid density 2. Using imported high-speed STM32 chip processing, high sensitivity and accurate data 3. Automatic sampling: Xiongfa special automatic sampling system, automatic quantitative technology, high precision 4. Using self-developed technology to remove residues to ensure that samples are free of residues 5. Constant temperature control: adopts self-developed Peltier refrigeration technology, high cooling efficiency and environmental protection 6. Wall-free treatment: the liquid will leave residual liquid on the inner wall of the oscillating tube during the flow process, which will affect the measurement accuracy. Therefore, the wall-free treatment on the inner wall of the oscillating tube can avoid residual liquid on the inner wall of the oscillating tube and ensure Improve the accuracy of the instrument. 7. Data storage and transmission: Built-in storage chip, which can store 80 sets of test data, and can be recalled and deleted. 8. Calibration function: Use 20℃ pure water as a standard to calibrate the instrument, which is impossible for glass densitometers Function of Technical Parameters: Density measurement range: 0.00001 -1.99999g/cm³ Density repeatability: ±0.0003 g/cm³ Automatic temperature control: 15-35℃ Temperature repeatability: ±0.1 °C (0.2 °F) U-shaped tube visual function: automatic sampling detection function: Yes Ambient temperature requirement: 5℃~35℃ Minimum sample amount: 1.5Ml Built-in table and function: density , Alcohol concentration table U-tube material: borosilicate glass Dimensions (length x width x height) 206mm×205mm×200mm Weight: 3.6kg Power supply: 220V±22V, 50Hz±1 Hz, 50VA Display LED display Data storage capacity: Internal memory 80 measurement results Other special functions: Built-in temperature and humidity sensor for intelligent environmental monitoring
Introduction: U-tube oscillation method density meter, electronic liquid density meter is based on the principle of different oscillation frequencies when the double U-tube is filled with different media to measure the liquid density. After pumping the liquid to be tested into the resonant cylinder sensor, the single-chip microcomputer performs measurement data processing, which is fast, direct, and highly sensitive. It is composed of double tuning fork density sensor, vibrating tube circuit, temperature measurement circuit, CPU, display, constant temperature bath, liquid inlet pump and control panel. Use field: Petroleum, diesel, cleaning fluid, lubricating fluid, chemical liquid, flux, crude oil, chemical reagent, stupid, toluene, flavor and fragrance, essential oil, Density testing in alcohol and beverage industries can convert the concentration for alcohol and sulfuric acid solutions!
