Brief introduction: Jb-5c /6C profile roughness tester is a two-part precision measuring instrument, which is widely used in machining, automobile, bearing, machine tools, touch tools, precision hardware, optical processing and other industries. The instrument drive box provides high-precision linear reference guide with a range of 100, 120 and 150 mm. The sensor moves in a straight line along the guide, and the displacement is collected by precision grating displacement sensor. Therefore X coordinate measuring unit is set up, in the Z axis adopts two specifications from 10 mm to 20 mm differential inductance sensor, drive box can be adjusted by level button to adjust the level of plus or minus 10 degrees, and respectively through the operation of the control box key or software interface for the movement of the horizontal and vertical direction, shape can be arbitrary scaling up for sampling and instruments with special computer and measurement software, measurement under WINDOWS XP operating system software operation is convenient, rich functions, high accuracy, good stability, and convenient to print and file. The roughness and profile shape parameters of various precision machinery parts can be measured. The fitting method can be used to evaluate radius, Angle treatment, circle treatment, point line treatment, two circle center distance Angle, distance, etc. Thus, the shape parameters such as straightness, convexity, groove center distance, inclination, groove depth, groove width, groove edge distance, groove center distance, vertical distance, horizontal distance and step can be measured. Compared with the performance of imported instruments, this instrument has reached the international standard, meeting the requirements of national standard GB/ t3505-2000, GB/ t6062-2001, GB/ t10610-1998, and international standards ISO5436, ISO11562 and ISO4287. Product details: Model no. :JB-5C; JB-6C Test parameters: Ra, Rz, Rt, RS, RSm, Rp, Rv, Rmax, Rq, D, Pt, Lr,Ln and Rmr(Tp) curves Magnification rate of roughness contour figure:10，20，50，100，200，500，1000，2000，5000，10000，20000，50000，100000，200000，500000 or automatic Roughness measurement range: Ra 0.01 -- 10 (m) or above Sampling length: L: 0.08,0.25, 0.8, 2.5,8 mm or arbitrarily set Evaluation length: Ln: 1L, 2L, 3L, 4L, and 5L can be optional Instrument evaluation sampling: 100000 Resolution: 0.001 welding m Error of indicator: plus or minus (5 +4nm) Measurement repeatability: + / - 3 Maximum height of workpiece measured: 370mm The sensor can measure the surface roughness of various parts, such as plane, inclined plane, inner hole surface, outer cylinder surface, deep groove surface, arc surface and sphere surface Natural diamond stylus: standard, 12mm high Small pass, 4mm Stitch radius: 2, displacement m, stitching static pressure: 0.004N, apex Angle: 60 degrees Glide speed of drive box: 2mm/ SEC Drive box lifting form: Auto lifting Movement speed: 0.5mm/SEC, 1mm/ SEC Linear region: vertical to 640 um Measuring range of steps and Pt: 1mm Axial measurement range: 100mm;120 mm and 150 mm (6 CA) Contours: direct contours, filtered contours The X and Y magnification ratio of contour figure: 1-500 times click to enlarge Filters: ISO 2CR Filters ISO 2CR Filters Aperture measuring range:?5 mm X-y workbench: Rotation plus or minus 10? X-y move range Adjustment 15 mm Bearing inner and outer ring dimensions: inner ring maximum outer diameter 280mm The thickness of 160 mm The minimum aperture of the outer ring is 15mm Measurement range: X: 100mm;X: 120mm or 150mm (JB-6CA) Z: 10 mm;Z: 20 mm Shape measurement function: elements: point, line, top, valley, intersection, contact, middle line. Analysis: coordinate difference, distance, Angle, radius, profile, etc. Sensor range: 1mm(roughness), 10mm (contour);1mm(roughness), 20mm (contour) Magnification rate of shapes: 1,2,3,4,5,10,20,50,100,120,150,200,250,300,350,400,450, 500 Ratio of range to resolution: 65,536:1 Radius error: 0.1-1.0 Axial measurement range: 100mm Sampling speed: 0.5mm/ SEC, 1mm/ SEC Movement speed: 2mm/ SEC Range of motion: X: 100mm Z: 370mm;Z: X: 120 mm to 370 mm Contact length: 18mm and 6.5mm;30 mm and 12 mm Radius of needle tip: 10 mm Angle of needle tip: 16 degrees of long needle, 30 degrees of short needle Load: 0.01 to 0.02 N Printing paper specification: A4 paper Operating system: win98/2000 /XP Instrument power supply: 220 VAC + 10, 50Hz Marble table size: 700mm x 400mm x 100mm Weight: 150 kg Gross weight of instrument: 200Kg
Brief introduction: Jb-5c /6C profile roughness tester is a two-part precision measuring instrument, which is widely used in machining, automobile, bearing, machine tools, touch tools, precision hardware, optical processing and other industries. The instrument drive box provides high-precision linear reference guide with a range of 100, 120 and 150 mm. The sensor moves in a straight line along the guide, and the displacement is collected by precision grating displacement sensor. Therefore X coordinate measuring unit is set up, in the Z axis adopts two specifications from 10 mm to 20 mm differential inductance sensor, drive box can be adjusted by level button to adjust the level of plus or minus 10 degrees, and respectively through the operation of the control box key or software interface for the movement of the horizontal and vertical direction, shape can be arbitrary scaling up for sampling and instruments with special computer and measurement software, measurement under WINDOWS XP operating system software operation is convenient, rich functions, high accuracy, good stability, and convenient to print and file. The roughness and profile shape parameters of various precision machinery parts can be measured. The fitting method can be used to evaluate radius, Angle treatment, circle treatment, point line treatment, two circle center distance Angle, distance, etc. Thus, the shape parameters such as straightness, convexity, groove center distance, inclination, groove depth, groove width, groove edge distance, groove center distance, vertical distance, horizontal distance and step can be measured. Compared with the performance of imported instruments, this instrument has reached the international standard, meeting the requirements of national standard GB/ t3505-2000, GB/ t6062-2001, GB/ t10610-1998, and international standards ISO5436, ISO11562 and ISO4287.
