Brief introduction: IT-8 infrared thermometer is a high performance temperature measurement instrument. It can meet the requirements of almost all temperature measuring occasions. Powerful users using auxiliary software system and man-machine interaction can provide on-site calibration function and provide users with perfect use experience, which is the best choice for industrial temperature measurement. Hardware configuration: excellent optical components and precision mechanical components, high-light four-bit LED display, coaxial laser aiming, range coefficient ratio of up to 320: 1, various measurement modes, and various standard analog outputs available. For the customer site use and secondary development to provide rich resources. Software configuration: pipelined operation, parameter sequence cycle, can set the required output specifications, can be calibrated real-time measurement value. Special PC software can be used together to obtain historical data and data analysis pictures. In a multi-point network, 32 thermometers can work simultaneously. Model design:-25 ℃ to 3000 ℃ scientific segment, with good industry matching characteristics. Can meet most industrial site temperature measurement requirements. Parameter setting: emissivity, peak measurement, peak holding, measuring speed, communication parameters, etc. The emissivity is continuously adjustable in the range of 0.10 ~ 1.00, and the adjusting step is 0.01.The peak value measurement is usually used in the situation of drastic temperature change and transient temperature measurement. Basic parameters: Measured temperature range and response wavelength: IT - 8 l1-25-800 ℃ 8 to 14 microns (food electricity plastic and below 800 ℃ temperature detection) IT - 8 l2 50-500 ℃, 2-3.1 microns (soldering lead welding aluminum) IT 8 h1-200-800 ℃, 0.7 to 1.7 microns (lead tin aluminum copper and other non-ferrous metal hot working) IT to eight h2 300-1400 ℃, 0.7 to 1.7 microns (forging heating wire heat treatment pipe crystal production chemical) IT 8 h3-800-2600 ℃ 0.4 to 1.1 microns (special high temperature molten steel temperature furnace temperature measurement) IT - 8 h4. 1000-3000 ℃, 0.4 to 1.1 microns (vacuum equipment tungsten molybdenum materials of rare earth industry synthetic diamond industry) Measurement accuracy: + + 1%FS/ + 0.5%FS Repeat accuracy: 0.2% Resolution: 0.5 ℃ / 1 ℃ Response time: <50ms/<5ms Optical parameters: Lens type: silicon/germanium/double glued lens Probe: thermoelectric reactor /InGaAs/SI Measuring distance: 0.35m minus infinity /0.6m minus infinity Distance coefficient: 120:1/320:1 Minimum target measurable: 2mm /1.5mm Electrical parameters: Power supply: 24VDC (+ / - 20%, 500mA) Analog output: 0-5v /0-20 mA /4-20mA Digital output: RS485 (optional) Power consumption: < 1.2 W Insulation voltage: less than 500VAC Load capacity: 500 Ω or less Operating parameters and standards: Ambient temperature: < 60 ℃ Relative humidity: 10-95%, with no condensation 25 to 45 ℃ Physical size: Φ 50 * 186 mm Weight: 0.62 kg
Brief introduction: IT-8 infrared thermometer is a high performance temperature measurement instrument. It can meet the requirements of almost all temperature measuring occasions. Powerful users using auxiliary software system and man-machine interaction can provide on-site calibration function and provide users with perfect use experience, which is the best choice for industrial temperature measurement. Hardware configuration: excellent optical components and precision mechanical components, high-light four-bit LED display, coaxial laser aiming, range coefficient ratio of up to 320: 1, various measurement modes, and various standard analog outputs available. For the customer site use and secondary development to provide rich resources. Software configuration: pipelined operation, parameter sequence cycle, can set the required output specifications, can be calibrated real-time measurement value. Special PC software can be used together to obtain historical data and data analysis pictures. In a multi-point network, 32 thermometers can work simultaneously. Model design:-25 ℃ to 3000 ℃ scientific segment, with good industry matching characteristics. Can meet most industrial site temperature measurement requirements. Parameter setting: emissivity, peak measurement, peak holding, measuring speed, communication parameters, etc. The emissivity is continuously adjustable in the range of 0.10 ~ 1.00, and the adjusting step is 0.01.The peak value measurement is usually used in the situation of drastic temperature change and transient temperature measurement.
