IT-6 infrared thermometer Introduction: The IT-6 is an economical infrared thermometer with a high price/performance ratio. Excellent shape design, sturdy, beautiful and durable. The aluminum alloy casing has good electromagnetic shielding properties to ensure reliable operation of the instrument in a complex electromagnetic environment. Center laser aiming (IT-6H1/IT-6H2/IT-6H3) or parallel laser aiming (IT-6L1/IT-6L2) for on-site installation. For the protective gas heating system, the vacuum heating system, the plasma heating system, and the laser aiming can simultaneously illuminate. The auxiliary laser aiming is activated by one button, and the automatic delay is extinguished, which can greatly extend the service life of the laser and also make the instrument work at a lower power consumption. Especially for some moving targets, when the workpiece size is different, you can press the aiming laser switch at any time to confirm the aiming point and make the instrument work in the best installation position. Avoid measurement errors due to the mounting position. The four-speed emissivity is adjustable (0.95, 0.9, 0.85, 0.8) to meet the general site temperature calibration requirements. Application industry: Suitable for forging, heat treatment, smelting, hot pressing and other heating processes, widely used in auto parts manufacturing, steel mills, glass machinery, wire and other industries. Basic parameters: Measuring temperature range and response wavelength: IT-6L1 -25-500°C 8-14μm IT-6L2 -25-1000°C 8-14μm IT-6H1 300-1200°C 0.7-1.7μm IT-6H2 500-1400°C 0.7-1.7μm IT-6H3 800-2500°C 0.4-1.1μm Measurement accuracy: ±1.5%FS/±1%FS Repeatability: 0.5% Resolution: 1 °C Response time: <50ms/<10ms Optical parameters: Lens Type: Silicon/锗/Double Glue Lenses Detector: Thermopile/InGaAs/SI Measuring distance: 0.35m-∞/0.6m-∞ Distance factor: 70:1/220:1 Measurable minimum target: 3mm/1.5mm Electrical parameters: Power supply: 24VDC (±20%, 500mA) Analog output: 0-5V/0-20 mA / 4-20mA Digital output: RS485 (optional) Power consumption: <1W Insulation voltage: ≤500VAC Load capacity: ≤300Ω Operating parameters and implementation standards: Ambient temperature: <60°C Relative humidity: 10-95%, no condensation 25-45 ° C Physical size: Φ45×170mm Weight: 0.51kg Mechanical shock: GB/T2423.8-1995 Thermal shock: GB/T2423.1, GB/T2423.2 Anti-interference standard: JB/T9233.11-1999 Executive standard: Q/DK001-2015
Introduction: The IT-6 is an economical infrared thermometer with a high price/performance ratio. Excellent shape design, sturdy, beautiful and durable. The aluminum alloy casing has good electromagnetic shielding properties to ensure reliable operation of the instrument in a complex electromagnetic environment. Center laser aiming (IT-6H1/IT-6H2/IT-6H3) or parallel laser aiming (IT-6L1/IT-6L2) for on-site installation. For the protective gas heating system, the vacuum heating system, the plasma heating system, and the laser aiming can simultaneously illuminate. The auxiliary laser aiming is activated by one button, and the automatic delay is extinguished, which can greatly extend the service life of the laser and also make the instrument work at a lower power consumption. Especially for some moving targets, when the workpiece size is different, you can press the aiming laser switch at any time to confirm the aiming point and make the instrument work in the best installation position. Avoid measurement errors due to the mounting position. The four-speed emissivity is adjustable (0.95, 0.9, 0.85, 0.8) to meet the general site temperature calibration requirements. Application industry: Suitable for forging, heat treatment, smelting, hot pressing and other heating processes, widely used in auto parts manufacturing, steel mills, glass machinery, wire and other industries.
