IT-5 infrared thermometer Introduction: The IT-5 is a simple linear infrared thermometer. The body is small and the diameter is only 28mm, which requires less installation space. The housing comes with a thread and a lock nut that can be installed without the need for complicated external accessories. It has strong anti-electromagnetic interference capability and can work normally even if it is 100mm away from the high-frequency induction coil. The temperature measurement response time is less than 5ms, which is especially suitable for the transient temperature measurement and control of heating process with relatively small heat capacity. The temperature range is only 300~1000°C and 400~1200°C. For high temperature measurement, please choose other series of products. The thermometer has a laser-assisted aiming system that aims to aim the laser beam through the fiber to make the measurement and aiming absolutely coaxial (ie, the laser aiming point is the measured point) The distance coefficient ratio is 180:1, and the minimum diameter of the measured target is up to 1.5mm. Technical Parameters: Measuring temperature range and response wavelength: IT-5H1 300-1000°C 1-1.7μm brazing (carpentry saw blade diamond saw blade welding glasses frame welding) IT-5H2 400-1200°C 1-1.7μm (Aluminum cutter hot press sintering) Measurement accuracy: ±1% FS Repeatability: 0.2% Resolution: 0.5 °C Response time: <5ms Optical parameters: Lens type: double cemented lens Detector: InGaAs Measuring distance: 0.3 -5m Distance factor: 180:1 Measurable minimum target: 1.5mm Electrical parameters: Power supply: 12VDC (±20%, 500mA) Analog output: 4-20mA Digital output: none Power consumption: <1.2W Insulation voltage: ≤500VAC Load capacity: ≤300Ω Operating parameters and implementation standards: Ambient temperature: <60°C Relative humidity: 10-95%, no condensation 25-45 ° C Physical size: Φ28×160mm Weight: 0.4kg Mechanical shock: GB/T2423.8-1995 Thermal shock: GB/T2423.1, GB/T2423.2 Anti-interference standard: JB/T9233.11-1999
Introduction: The IT-5 is a simple linear infrared thermometer. The body is small and the diameter is only 28mm, which requires less installation space. The housing comes with a thread and a lock nut that can be installed without the need for complicated external accessories. It has strong anti-electromagnetic interference capability and can work normally even if it is 100mm away from the high-frequency induction coil. The temperature measurement response time is less than 5ms, which is especially suitable for the transient temperature measurement and control of heating process with relatively small heat capacity. The temperature range is only 300~1000°C and 400~1200°C. For high temperature measurement, please choose other series of products. The thermometer has a laser-assisted aiming system that aims to aim the laser beam through the fiber to make the measurement and aiming absolutely coaxial (ie, the laser aiming point is the measured point) The distance coefficient ratio is 180:1, and the minimum diameter of the measured target is up to 1.5mm.
