Brief introduction: Heating temperature control table is suitable for the requirements to 100 ° ℃ consistent sway to high-speed precise application.Our shaking table has heating and swaying functions, using interchangeable modules to place test tubes and micro-orifice plates.The user touches the clear and intuitive LCDThe touch screen can save or terminate the test while meeting the need of 5 users to set the shaking program, each program can be packagedThere are five independent steps.More advanced electronic components can provide reliable temperature Settings under different operating conditions. Technical parameters: Motion mode: circle diameter, 3mm New Attribute: a single thermostat module Temperature range: 4 ℃ ~ 100 ℃ higher than environment Calibration: temperature calibration Communication: USB Control mode: touch control Dimensions (height x length x width) : 13.2 cm x 26 cm x 24.8 cm Drive system: brushless dc motor The heating rate: 5 ° C/min Net weight: 4.9 kg Circumference diameter: 3 mm Power supply (2) : 230V, 0.9a, 50/60hz Energy consumption: 210 W Safety certification: CE; TUV Speed accuracy: + / - 2% Speed range: 300 RPM - 3,000 RPM Temperature accuracy (plus or minus) : between 20 ° C and 45 ° C to + / - 0.5 ° C; Under 20 ° C and 45 ° C to + / - 2 ° C Timing range: 1 second - 99 hours, 59 minutes Working environment: 5 ° C - 35 ° C and 80% RH, the condensation
Brief introduction: Heating temperature control table is suitable for the requirements to 100 ° ℃ consistent sway to high-speed precise application.Our shaking table has heating and swaying functions, using interchangeable modules to place test tubes and micro-orifice plates.The user touches the clear and intuitive LCDThe touch screen can save or terminate the test while meeting the need of 5 users to set the shaking program, each program can be packagedThere are five independent steps.More advanced electronic components can provide reliable temperature Settings under different operating conditions.
