Application scope: It met the requirements of the YY0569 standard and the third-level biosafety cabinet in the us NSF/ANSI49 standard. Apply to volatile toxic, radioactive material samples. Is fully closed, full negative pressure and full discharge characteristics.100% of the air is discharged into the laboratory system after two filters. To comply with the principle of ergonomics 10 ° Angle design, operation experience is preferred. The interior of the working area is made of the overall quality stainless steel plate, which is convenient for cleaning, disinfection and sterilization. To fully closed reinforced safety glass front Windows, with a strict physical method through isolation gloves for cabinet operations. To the right side of the cabinet with transfer window, there are uv lamp sterilization, so that products can be in the transfer window sterilization. The air is filtered through a high quality ULPA super-efficient filter with 99.999% interception efficiency for > 0.12 micron particles. Double filtration is performed outside to ensure the safety protection of product samples, laboratory staff and laboratory environment. Internal and external isolation valves for internal sterilization. Application of antibacterial coating on the exterior of cabinet can inhibit the growth of bacteria on the surface. The table supports the safety cabinet, the bracket and the upper box body can be separated, easy to carry and in place. Model and technical parameters: Parameter/model: III-1600 Cleanliness: HEPA: ISO 5 (Class100) /ULPA: ISO 4 (Class10) Filter level/filter efficiency: HEPA: greater than or equal to 99.995%, @0.3 process m/ULPA: greater than or equal to 99.999%, @0.12 process m Average supply wind speed: 0.35m/s Inlet wind speed: 0.6m/s Noise: 58-65db (A) Vibration half-peak value Illumination: greater than or equal to 700Lx Maximum power consumption: 0.6kw Internal pressure: -125 Power supply: -220v, 50Hz Weight: 340 kg Number of gloves: 2 Working area size: 1200 x 600 x 600 mm External dimension: 1600 * 760 * 1980mm Fluorescent lamp/uv lamp specification and quantity: 30Wx rest /30Wx visible Applicable number: single person
Application scope: It met the requirements of the YY0569 standard and the third-level biosafety cabinet in the us NSF/ANSI49 standard. Apply to volatile toxic, radioactive material samples. Is fully closed, full negative pressure and full discharge characteristics.100% of the air is discharged into the laboratory system after two filters. To comply with the principle of ergonomics 10 ° Angle design, operation experience is preferred. The interior of the working area is made of the overall quality stainless steel plate, which is convenient for cleaning, disinfection and sterilization. To fully closed reinforced safety glass front Windows, with a strict physical method through isolation gloves for cabinet operations. To the right side of the cabinet with transfer window, there are uv lamp sterilization, so that products can be in the transfer window sterilization. The air is filtered through a high quality ULPA super-efficient filter with 99.999% interception efficiency for > 0.12 micron particles. Double filtration is performed outside to ensure the safety protection of product samples, laboratory staff and laboratory environment. Internal and external isolation valves for internal sterilization. Application of antibacterial coating on the exterior of cabinet can inhibit the growth of bacteria on the surface. The table supports the safety cabinet, the bracket and the upper box body can be separated, easy to carry and in place.