IGS1100 series portable electrochemical workstation
Introduction: The IGS1100 series is a computer-controlled portable potentiostat with simple operation and superior performance. The instrument consists of a digital signal generator, a data acquisition system, and a constant potential meter. The MCU data acquisition rate is 10 KHz, the digital to analog converter DAC and the data acquisition system ADC are 16 bits, which have the characteristics of high resolution and fast sampling speed. The instrument has a slot voltage of ± 7.5V, an output voltage range of ± 2.4V, and a current range of ± 2mA. The lower limit of current measurement is 100 pA, which can be directly used for steady-state current measurement on ultra microelectrodes. The instrument is small in size and lightweight, and can be connected to a computer for communication and power supply through a USB interface. It does not require an external power source or battery, making it particularly suitable for electrochemical analysis and testing in the field. The IGS1100 series is subdivided into three models to better meet customer needs, each with different electrochemical measurement technologies and functions, providing extremely high cost-effectiveness. Technical parameters: Hardware parameter indicators Potentiostat Potential range: ± 2.4 V Current range: ± 2 mA Current range: 1 nA -2 mA, seven levels in total Current measurement resolution:<10 pA Current measurement low-pass filter CA and CC pulse width: 1 ms-1000 s DPV and NPV pulse width: 1 ms-10 s Slot pressure: ± 7.5 V Reference electrode input impedance: 1e12 ohm Input bias current:<100 pA Data acquisition system: 16 bits @ 10 kHz CV and LSV scanning speed: 1 uV/s-10 V/s CA and CC step count: 1-320 SWV frequency: 1-5000 Hz Maximum data length: 128000 to 4096000 points Net weight of instrument: 590 grams Size: 16.5 (long) × 10.5 (width) × 4 cm (height)
Introduction: The IGS1100 series is a computer-controlled portable potentiostat with simple operation and superior performance. The instrument consists of a digital signal generator, a data acquisition system, and a constant potential meter. The MCU data acquisition rate is 10 KHz, the digital to analog converter DAC and the data acquisition system ADC are 16 bits, which have the characteristics of high resolution and fast sampling speed. The instrument has a slot voltage of ± 7.5V, an output voltage range of ± 2.4V, and a current range of ± 2mA. The lower limit of current measurement is 100 pA, which can be directly used for steady-state current measurement on ultra microelectrodes. The instrument is small in size and lightweight, and can be connected to a computer for communication and power supply through a USB interface. It does not require an external power source or battery, making it particularly suitable for electrochemical analysis and testing in the field. The IGS1100 series is subdivided into three models to better meet customer needs, each with different electrochemical measurement technologies and functions, providing extremely high cost-effectiveness.
