Introduction: iFIA E provides you with a complete automatic intelligent solution chemical analysis solution. FLOW INJECTION ANALYZER is an integrated micro-pipeline system based on the principle of flow injection technology (FIA), which can realize drinking water and environmental water without complicated and tedious manual solution treatment. Volatile phenol, (total) cyanide, anionic surfactant, ammonia nitrogen, sulfide, hypermanganate index, total phosphorus, total nitrogen and other components are required for high-throughput and high-precision detection. All pre-processing devices such as distillation, extraction, and digestion are built in the instrument, ready to use, the program runs the experimental method automatically, the results are accurate and efficient, and the sample detection frequency is more than 20 per minute. The iFIA E automatic flow injection analyzer is committed to bringing a new solution in the era of wisdom to your laboratory. Features: 1. Stable liquid inlet system: Three-clamped pump tube type integral briquette peristaltic pump, with patented pressure regulating device, effectively solves the problem of traditional peristaltic pumps with different pump tube fatigue trends due to wall thickness. Ensure the stability of the long-term liquid intake and improve the detection accuracy. 2. Adaptive optics system: each channel contains a dedicated detector, which can automatically match the detection wavelength and gain intensity according to the setting method, to ensure that the optical system is always in the best state, and to improve the signal-to-noise ratio and detection sensitivity. 3. Built-in multi-pre-processing module: adopts highly integrated built-in heating, distillation, ultraviolet digestion, and cooling devices to avoid baseline fluctuations caused by environmental temperature changes. 4. Direct electric heating method: No heating oil is required, which avoids the risk of high temperature splashing and bursting of heating pipes caused by impure hot oil, which is more convenient and safe. 5. Built-in electronic condensing device: with a temperature-power output control device to ensure a stable condensing temperature so that the sample quantification after distillation is more accurate, without the need for a circulating condensate device. In addition, a variety of autosamplers can be configured to meet the multi-sample level detection requirements of different items such as volatile phenol, (total) cyanide, anionic surfactants, etc. in water quality. All detection methods comply with GB/HJ/ISO/EPA and other standards, with low detection limits and high stability
Introduction: iFIA E provides you with a complete automatic intelligent solution chemical analysis solution. FLOW INJECTION ANALYZER is an integrated micro-pipeline system based on the principle of flow injection technology (FIA), which can realize drinking water and environmental water without complicated and tedious manual solution treatment. Volatile phenol, (total) cyanide, anionic surfactant, ammonia nitrogen, sulfide, hypermanganate index, total phosphorus, total nitrogen and other components are required for high-throughput and high-precision detection. All pre-processing devices such as distillation, extraction, and digestion are built in the instrument, ready to use, the program runs the experimental method automatically, the results are accurate and efficient, and the sample detection frequency is more than 20 per minute. The iFIA E automatic flow injection analyzer is committed to bringing a new solution in the era of wisdom to your laboratory.
